• Help Support Hardline Crawlers :

'92 Toyota

TTF Fabrication

Well-Known Member
Joined
Nov 27, 2006
Messages
431
Location
Kirkland
So I built this truck about two years ago and haven't done much with it since. It needs a new housing and I have one ready to go in. I have slider's built for it and I just built the front bumper for it today with the help of skinny pedal. Will probably work on a rear bumper in the near future.
 

Attachments

  • Fabrication 001.jpg
    Fabrication 001.jpg
    45.5 KB · Views: 330
  • Fabrication 002.jpg
    Fabrication 002.jpg
    38.7 KB · Views: 317
  • Fabrication 003.jpg
    Fabrication 003.jpg
    35.5 KB · Views: 324
  • Fabrication 005.jpg
    Fabrication 005.jpg
    50.5 KB · Views: 335
  • Fabrication 015.jpg
    Fabrication 015.jpg
    40.5 KB · Views: 328
I'm going to finish up some bracing on the bumper tomorrow and make the mount for my fairlead then do some bracing on the core support as I cut a lot of it out to get the winch tucked in. I'll probably also add some small amber LED's for turn signals.
 

Attachments

  • Fabrication 016.jpg
    Fabrication 016.jpg
    53.2 KB · Views: 324
  • Fabrication 017.jpg
    Fabrication 017.jpg
    31.9 KB · Views: 323
  • Fabrication 020.jpg
    Fabrication 020.jpg
    45.4 KB · Views: 323
  • Fabrication 021.jpg
    Fabrication 021.jpg
    40.5 KB · Views: 327
Is all your tubework only being supported by the front of the winch plate or are you adding in some more to atleast support the ends out by your fenders?
 
Is all your tubework only being supported by the front of the winch plate or are you adding in some more to atleast support the ends out by your fenders?

Right now it is but I am going to support it out at the fenders. I want to leave the area in front of the tires as open as possible so I'll probably do it out of 1" and bend it to keep it up tight. I also need to add some gussets to put some small led's in for blinkers.
 
Wait a minute... Is this the truck that replaced your gray 1st Gen? I got some parts off your old truck! And your old frame/cab ended up parked at my house for a while!
 
Pulled it in the shop and mounted up my new wheels and tires! 37x12.5x17 MT/R's on 17x8.5" MB wheels.
 

Attachments

  • Random 008.jpg
    Random 008.jpg
    39.2 KB · Views: 154
  • Random 009.jpg
    Random 009.jpg
    33.1 KB · Views: 155
  • Random 010.jpg
    Random 010.jpg
    48.6 KB · Views: 166
  • Random 011.jpg
    Random 011.jpg
    39.8 KB · Views: 159
  • Random 012.jpg
    Random 012.jpg
    44.8 KB · Views: 163

Latest posts

Back
Top