AW4 bellhousing Dimensions

[Rokcrler]

Thought I'd share this from Acerni Racing.

 

[xjkrawler]

Thanks!

But being a toyota guy what do you need this for? ;D

 

[Rokcrler]

Re:

AW4 trans, make sure it's 23 spline not 21, d300 bolts to it, might need a 7/8" thick clogoing ring.
Depending on which engine you're wanting to use determine the engine side.

I'm planning an AW4 to 2.2 ecotec, or 2/3rz to AW4 which only requires a 3rz auto bell ( Thanks chilkat)

 

[sleepsontoilet]

I'm running an AW4 behind an SC3800 using an Isuzu 3.5l bellhousing. The 300 needs a 7/8 ring because it will bottom out before ever getting close.

 

[offroadr1]

aw4 and toyota a340e transmission are essentially the same transmission. I am using one behind a 3rz with a flipped dana 300 on a project i have been working on

 

[Rokcrler]

Re:

^Build thread sir

 

[offroadr1]

Theres not one. Its basically at a semi permanent stall

 

[Rokcrler]

Re:

Well, snap some pics and post up brotha

 

[Technician]

2jz-gte to Aw4 to np-231 box for rocks to dana 300

 

[Rokcrler]

Re: Re: Re: AW4 bellhousing Dimensions

2jz-gte to Aw4 to np-231 box for rocks to dana 300

What components for the assembly?

 

[Technician]

What components for the assembly?

2jz-gte with 2jz bellbhousing and 2jz TC, bolts up to AW4 which bolts up NP-231 box for rocks which bolts up dana 300

 

[84mallcrawl]

2jz-gte with 2jz bellbhousing and 2jz TC, bolts up to AW4 which bolts up NP-231 box for rocks which bolts up dana 300

have you done this? If so I want to see pictures, because I happen to have some of these components

 

[Technician]

(In my best Asian voice)
Me no boo ****

 

[Rokcrler]

Re:

That's a whole lotta badass weepow right there!

 

[84mallcrawl]

very cool. Is this reg built and running or is this its current state