wizzo
Well-Known Member
I'm selling this housing and what is welded on/ attached. Inner C to inner C, I hope that is clear enough
*will have a fresh coat of paint soon*
Comes with:
Artec truss & ram mount system
PSC DE ram mounting plates
Ruff Stuff lower link tabs & shock mount tabs
Artec upper link mounts
Yukon 1350 yoke
Yukon gear 5.13 ring & pinion (Not added into value b/c of unknown condition. I'm still running the axle now but have not pulled the cover in a while)
Yukon spool
I have the stock brake calipers, rotors, brackets, etc. that I will throw in as well
DOES NOT INCLUDE:
Shafts, diff cover, knuckles/ high steer arms, Wilwood calipers, hubs/ rotors, drive flanges, PSC ram & tie rods. I think that about covers it.
$800 (I've got more than that in aftermarket parts on this thing...........not including gears or install kit.............)
$600 with out spool and 1350 yoke
Located in Glasgow, KY
Feel free to PM me here or call or text 270-996-0791
*will have a fresh coat of paint soon*
Comes with:
Artec truss & ram mount system
PSC DE ram mounting plates
Ruff Stuff lower link tabs & shock mount tabs
Artec upper link mounts
Yukon 1350 yoke
Yukon gear 5.13 ring & pinion (Not added into value b/c of unknown condition. I'm still running the axle now but have not pulled the cover in a while)
Yukon spool
I have the stock brake calipers, rotors, brackets, etc. that I will throw in as well
DOES NOT INCLUDE:
Shafts, diff cover, knuckles/ high steer arms, Wilwood calipers, hubs/ rotors, drive flanges, PSC ram & tie rods. I think that about covers it.
$800 (I've got more than that in aftermarket parts on this thing...........not including gears or install kit.............)
$600 with out spool and 1350 yoke
Located in Glasgow, KY
Feel free to PM me here or call or text 270-996-0791