I built this rig over the last 5 years
Its a 86 3/4 long bed thats been shortened narrowed and boat sided. exo and flabed. 23in belly height 137in wheel base
350 sbc with less than 20k. holley projection
sm 465 hydro bell housing new clutch this year
np 205 clocked flat with twin sticks
rockwells welded with u joint axles
flat belly skid of 3/8 plate
4 link rear 1.25 hiems 2.25 3/8 wall dom lowers 7/8 hiems 1.5 .25 wall dom uppers
3 link front all 1.25 hiems and 2.25 3/8 wall dom
coil springs front and rear rancho rs5000 14in shocks
46in baja claws on h1s
cheap ag shaft driveshafts needs to be upgraded if you want to go real fast 1350 front joints 1410 rear
flat belly with 3/8 in plate skid
asking 13k located in rogerville tn
have several parts for upgrades like fuel cell another steering rockwell big aluminum radiator and a 400 hp sbc (conservative est.)for extra $
Its a 86 3/4 long bed thats been shortened narrowed and boat sided. exo and flabed. 23in belly height 137in wheel base
350 sbc with less than 20k. holley projection
sm 465 hydro bell housing new clutch this year
np 205 clocked flat with twin sticks
rockwells welded with u joint axles
flat belly skid of 3/8 plate
4 link rear 1.25 hiems 2.25 3/8 wall dom lowers 7/8 hiems 1.5 .25 wall dom uppers
3 link front all 1.25 hiems and 2.25 3/8 wall dom
coil springs front and rear rancho rs5000 14in shocks
46in baja claws on h1s
cheap ag shaft driveshafts needs to be upgraded if you want to go real fast 1350 front joints 1410 rear
flat belly with 3/8 in plate skid
asking 13k located in rogerville tn
have several parts for upgrades like fuel cell another steering rockwell big aluminum radiator and a 400 hp sbc (conservative est.)for extra $
