ahaggard81
Member
- Joined
- Feb 26, 2013
- Messages
- 14
cj7 jeep
« on: March 06, 2013, 06:58:40 PM »
QuoteModify
--------------------------------------------------------------------------------
<a href="http://s1323.beta.photobucket.com/user/ahaggard_/media/aaron/photo_zps13de6bba.jpg.html" target="_blank"><img src="http://i1323.photobucket.com/albums/u593/ahaggard_/aaron/photo_zps13de6bba.jpg" border="0" alt=" photo photo_zps13de6bba.jpg"/></a>0.
1980 cj 7. roller, tub frame axels, hood, fender cpmplete frame and body. has scout dana 44 front and rear. detroit in rear and trutrac in front,4.56 gears. highsteer arms by skys offroad, lockouts have been converted to internal ford style with all new parts. bearings, axel joint, hub, rotor, and new warn lock outs. sprung over on two inch lift. pinion reset and knuckels turned. Has 95% 36x13.50x15 irocks on older steel wheels. Has power brakes and tilt wheel, all brakes and steering works well and drove good on street. seets steering ect is all there, i am keeping engine trans/case and drive shafts. It set up is for a chevy 350. asking $3500. i have that much in axels and tires. I also have a 304 engine mated to a t18and a dana 20 case with raditor, headers, mounts. most of what needed to install in jeep. i would sell for exta money with the jeep only. 1-618-9273439, im located in DuQuoin Il. southern part of illinois!
PRICE REDUCED 2800 FOR ROLLER!
« on: March 06, 2013, 06:58:40 PM »
QuoteModify
--------------------------------------------------------------------------------
<a href="http://s1323.beta.photobucket.com/user/ahaggard_/media/aaron/photo_zps13de6bba.jpg.html" target="_blank"><img src="http://i1323.photobucket.com/albums/u593/ahaggard_/aaron/photo_zps13de6bba.jpg" border="0" alt=" photo photo_zps13de6bba.jpg"/></a>0.
1980 cj 7. roller, tub frame axels, hood, fender cpmplete frame and body. has scout dana 44 front and rear. detroit in rear and trutrac in front,4.56 gears. highsteer arms by skys offroad, lockouts have been converted to internal ford style with all new parts. bearings, axel joint, hub, rotor, and new warn lock outs. sprung over on two inch lift. pinion reset and knuckels turned. Has 95% 36x13.50x15 irocks on older steel wheels. Has power brakes and tilt wheel, all brakes and steering works well and drove good on street. seets steering ect is all there, i am keeping engine trans/case and drive shafts. It set up is for a chevy 350. asking $3500. i have that much in axels and tires. I also have a 304 engine mated to a t18and a dana 20 case with raditor, headers, mounts. most of what needed to install in jeep. i would sell for exta money with the jeep only. 1-618-9273439, im located in DuQuoin Il. southern part of illinois!
PRICE REDUCED 2800 FOR ROLLER!
