Sold/Expired d60 carrier

[Rjhoward32006]

looking for a d60 carrier or spool. cheaper the better.678-451-2794 text or pm

 

[97cummins]

Sent pm

 

[Rjhoward32006]

Needs to be 35 spline and for a rear low pinion.

 

[pholmann]

4…10 down or 4.56 up?

 

[Rjhoward32006]

4.56 and up

 

[mdo817]

Needs to be 35 spline and for a rear low pinion.

All D60 carriers are the same (Hi or Low pinion) only thing that matters is the gear break. Are your gears still good Jesse?

 

[Chaz]

Can't you just weld the crap out of it and run the one you have? What messed up on the carrier?

 

[pholmann]

Most rears are 30 spline. You positive you need 35?

 

[mdo817]

Most rears are 30 spline. You positive you need 35?

Yes, his is 35 spline, its been upgraded!!

 

[pholmann]

Just checking.

 

[Rjhoward32006]

Weld what? the side spiders are currently welded but i'm going to assume that wont last long. Probably just go with a spool. I ran the rear without oil for a day and a half before the bearings locked up and the pinion came loose so i'm guessing the gears are done. Havent opened the cover to check though

 

[Chaz]

Maybe put some plate in there and weld it or jam a bunch of nuts and bolts in there and weld it all up. It's an option anyway if you can't find anything else for reasonable.

a

 

[mdo817]

Re:

Fill it full of scrap metal and weld the piss out of it.

 

[ranger11]

Re:

Concrete it with rebar then weld rebar.

 

[Rokcrler]

Re: Re:

Concrete it with rebar then weld rebar.

How's he gonna weld the rebar already encased in concrete??

 

[Jduck]

Re: Re:

How's he gonna weld the rebar already encased in concrete??

Jesse got them skills!

 

[Scott F.]

I still have this one sitting in my garage. $40 35 spline. I am in Canton so near by.

http://www.hardlinecrawlers.com/forums/index.php?topic=28723.msg343766#msg343766

 

[ranger11]

Re: Re: Re:

How's he gonna weld the rebar already encased in concrete??

Leave a stub sticking out.

 

[Rjhoward32006]

Sold!!!

 

[Scott F.]

Sold!!!

I'll send you a PM.