• Help Support Hardline Crawlers :

Sold/Expired DD built one ton Jeep Wrangler FS/FT for ultra4 style buggy/ rock bouncer

Troy2d23

Active Member
Joined
Apr 22, 2012
Messages
31
This jeep has wheeled all over! The last year and a half I have lived in Moab and wheeled it weekly. I just recently moved back to Louisiana where I am from and the jeep got a much needed make over to be more street legal and a more dependable daily driver. I still wheel it at least once a month but I'm looking at getting into an ultra4 type buggy or rock bouncer or whatever. The jeep is in tip top shape and runs great. It is dirt riot legal and for it to be ultra4 legal it just needs a 2" cage and window nets. Still runs down the interstate just fine and is a great attention getting jeep on the streets. I took most of the AC components out but it still blows and the heat works great.


2003 Jeep TJ X with 142,600 miles on chassis
Engine, transmission, and transfercase have 16,500 miles on them.
Ported and polished intake manifold
cold air intake
1" JKS raised motor mounts
Genright power steering pully
Superchip programer
Cherrybomb muffler
Undercover fab transmission- engine skid with only 1" drop
BTF battery box
Custom crossmember holding everything up high

42RLE
3 speed auto with overdrive
Separate cooler with fan

Atlas Transfercase
3.8 gears with 1310 yoke front and 1350 yoke rear
Tom Woods rear shaft 1350
square front shaft 1310

Axles
1979 Ford high pinion Dana 60 front
5:13 gears
Detroit
Dutchman inner 35 spline shafts
Longfield Ujoints
Yukon 35 spline stubs
Mile marker premium hubs
M4O drive flanges also
Artec truss
Crane cover
Reid racing knuckles
ARP studs
Reid brass kingpin bushings
Artec high steer arms
Artec brackets
Spare stock inners with spicer ujoints and Dutchman stubs


14 Bolt rear
5:13 gears
Detroit
Stock shafts
Disk brakes
Crane 13 bolt diff cover
Artec truss and Artec brackets

Suspension
2" Aluminum lowers and 1.75" aluminum uppers
Ballistic joints and bushings at each end.
3 link front
4 link rear
stretched 3"s front and 8"s rear. wheelbase is 104"s.
14" King Coilovers 200/300 front and 150/200 rear at 150psi
2" King air bumps. At 100psi
Rear heavy duty sway bar

Steering
7/8s" heims
1.5" DOM .25" thick
Genright twisted pitman arm
PSC hydro assist with 8" ram
12" long cooler

Tires and Wheels
(4) 39.5x16.5x17 Pitbull Rockers on 17x10 Raceline beadlocks
(4) 37x14.5R17 Toyo MTs on Mickey Thompson Classic IIs
(1) 42x15x17 Pitbull Rocker on 17x10 Raceline beadlock

Misc. Stuff
Genright aluminum highline fenders with 4" flare and inner fenders
Glenright aluminum rear armor with 4" flare
Genright front bumper
Genright tub armor
BR Tech Racing lexan hood in smoke
Poison Spyder aluminum hood louver kit
Aluminum roof and rear firewall
SWAG aluminum flip down tailgate
32 gallon ATL racing cell with custom mount
M4O aluminum doors
grill hoop
Warn Powerplant
Synthetic rope
Custom tire carrier
Custom Cage with remove able door bars
Mastercraft Seats and belts
Pioneer CD/MP3/whatever and amp. wakeboard tower speakers. Very Loud!
Hardtop
Full doors
Yakima roofrack
Delta headlights
LED turn signals and brake lights

Located in Homer, Louisiana. But can travel for the right trade or sale. Have title in hand.
Really want to trade for ultra4 style buggy, rock bouncer, or nice trail buggy
$25,000



















 
Old picture, but shows the hard top and full doors still fit just fine.



When the axles were being built.

 
I hate to be this guy and ask this on a sale thread but is there a build thread on this jeep? Bump for a bad ass jeep that looks great
 
Top