S samurai Active Member Joined May 9, 2007 Messages 31 Mar 25, 2009 #1 warning lights or guages don't work every thing else works fine any help would be appreciated thanks jason
warning lights or guages don't work every thing else works fine any help would be appreciated thanks jason
jprcrpr94 Well-Known Member Joined Nov 23, 2007 Messages 2,451 Location NE Tacoma Mar 25, 2009 #2 Have you checked fuses?
F fitbike33 Active Member Joined Dec 12, 2008 Messages 43 Location bremerton Mar 25, 2009 #3 jprcrpr94 said: Have you checked fuses? Click to expand... x2:awesomework:
Rix Well-Known Member Joined May 29, 2007 Messages 1,094 Location Tacoma Mar 25, 2009 #5 Pull the cluster, amke sure it's plugged in..... and there's no melted bits of printed circuit.
8 86tuning Well-Known Member Joined Nov 9, 2007 Messages 84 Location Vancouver BC Mar 25, 2009 #7 samurai said: all fuses are good Click to expand... Did you check them with a voltmeter/test light or just visually? I'd double-check the gauge fuse.
samurai said: all fuses are good Click to expand... Did you check them with a voltmeter/test light or just visually? I'd double-check the gauge fuse.
T TooRisky Well-Known Member Joined Nov 24, 2007 Messages 1,145 Location S. Tacoma Mar 26, 2009 #8 X2 with volt check....sounds like a problem harness and would look for a new harness to sovle this and future probs...With new I mean NEW, used would be over 20 years old...Think about it... Last edited: Mar 26, 2009
X2 with volt check....sounds like a problem harness and would look for a new harness to sovle this and future probs...With new I mean NEW, used would be over 20 years old...Think about it...
S samurai Active Member Joined May 9, 2007 Messages 31 Mar 26, 2009 #9 checked visually will check with test light in the am thanks for all the help jason
S samurai Active Member Joined May 9, 2007 Messages 31 Mar 26, 2009 #10 wires were not pushed in fuse box all the way thanks for all the help jason