Sold/Expired enough parts to build a full roller buggy for sale or trade

[Dannyboy91]

I have 2 complete 2.5 ton rockwell front ends ones a virgin never been Debra ked or anything the other is Debraked with Detroit locker ..Wilwood pinion brake and hydraulic steering still on it 3 complete rears 2 with welded diffs one stock the one stock one and one welded one are virgins never been ran

Have 2 complete sets of drive shafts with 1410 and 1580 joints
Ls 5.3 engine complete oil pan to intake with harness
Th400 tranny or a few
np 200 midpoint tcase with all 1410 yoke with a halo built around it
4 precompiled (made by fox for 4 wheel parts) 2.0 4" travel air bumps with cans and hardware
4 16" 2.5 radflo emulsion coil overs with dual rate hardware
16 1.25 chromoly heims with bungs jams and misalignments
Wilwood pedal assembly dual master cylinder single pedal
Lokar gas pedal
grant steering wheel
320ft of 120 and 188 wall 1.75 dom tubing
1 like new set of 4 44 boggers on 15" Mrw beadlocks rockwell pattern
Possibly 1 set of 4 tsl like new on Mrw beadlocks rockwell pattern
2 corbeau suspension seats
lines and orbital valve for front steering
and some more stuff I'm sure I'm forgetting but if interested in anything call me at 9016496458 ide like to sell as a package deal but if enough interest I'll consider parting out
MAY ALSO TRADE FOR SOMETHING JUST MAKE OFFER

 

[1tonyj]

how much??

 

[Dannyboy91]

For what stuff exactly

 

[Dannyboy91]

10,500 obo not including tsl cause I haven't made the trade for them yet but I have 2 total sets of boggers and 1 spare and 2 sets of beadlocks but just make offer worse thing that will happen I'll say no

 

[r4x4m]

I be interested in the steering valves, cylinders, what is price and what is size of rams.

 

[Dannyboy91]

Air bumps heims coil overs seats and pedals are all brand
New in box still
Also the rams are 2x10

 

[bjeep]

How much for the heims?

 

[ushick]

How much for coilovers and seats?

 

[Rusty Nuts]

Whats the price on the tubing?? 320ft of 120 and 188 wall 1.75 dom tubing

 

[STROKERYOTA]

post prices next to the part

 

[midwestracer2003]

were are u located and how much for seats

 

[Dannyboy91]

Seats 450
Heims 1000 obo
Tubing 1500
Coil overs 1500
Air bumps 550
All 9 44 boggers and both sets of beadlocks with bolts 3500 obo
Wilwood brake pedal with dual master cylinder 150
Lokar gas pedal 50
5.7 vortec 600 or 750 with painless harness motor will be whole front clip cut from truck including stock harness
Th400 250 each
Steering wheel 20
K5 blazer on rockwells with 54 and 63 leaf swap front has Detroit locker and Wilwood pinion brake and hydro steering still on it truck is sitting as roller on military tires no motor trend or case have it to go back in also its a 454 well sell as is 2500 with title or 350 with motor and drive shafts supplying ur own transportation and case
And 1 stock front rockwell with 2 rears 1500

 

[Dannyboy91]

And 400 for the np 200 t case with halo built around it and 1410 yokes brand new never use

 

[Dannyboy91]

Sale pending

 

[Mr. Hogg]

Sale pending

For...all of it?

 

[Dannyboy91]

Would like to trade for well built yota worth same value or a really nice 4 wheeler or 2 if one plus boot and must be 700 cc or larger and 4x4 not wanting anything Older than 2005