Boz
Well-Known Member
Cleaning out, getting rid of some parts I no longer need.
1979 Ford Bronco/F-150 Dana 44, 1/2 ton, 5.5 lug pattern.
MIsc Pieces:
2 BEaring HUbs - $25 ea
Spindle - $25
Short Side axle assemb. - SOLD
1979 Ford Bronco/F-150 Dana 44, 1/2 ton, 5.5 lug pattern. Complete outer set for disc/ drum conversion: 2 outer knuckles, 2 spindles, 2 hubs, 2 brake brackets, 2 calipers, 4 pads, 2 Warn lockouts - $150
Calipers not pictured, they were still on the truck.
1979 Ford Bronco/F-150 9" center section. 4.10 gear, 31 spline detroit locker, 1350 u-bolt style yoke. have housing with axles/ drums if you want you can have with it. Axle splines are about wiped out. - $400
Set of 5 - 35x12.50x15 General Grabbers on factory Ford Bronco wheels. Wheels are in good shape with a few chps to the clear coat.. Tires are 40-60% tread remaining. No rash or plugs. Will seperate $900 - SOLD
Ford 8.8 rear axle 3.73 gear used - $25
Early Ford F-450 Super Duty Front 4x4 axle. Axle is a Carrero 6.07. It has 5.13 gears, kingpin knuckles, Double cardon axle joints, drive flanges, & is currently set up for a 4 link with a panhard bar. It is 10 on 7.25 lug pattern. This thing is huge. It dwarfs a 60 front. This is the axle MH used for the 4x4 conversions on mid to late 90's F-450's. 2 wheels & tires included. More pics available. - $2000
All parts located 1 hour north of Memphis, Tn. Near Covington, TN. Can help deliver for gas money, or will ship small parts on your dime. Will consider interesting trades. Not looking for anything in particular.
1979 Ford Bronco/F-150 Dana 44, 1/2 ton, 5.5 lug pattern.
MIsc Pieces:
2 BEaring HUbs - $25 ea
Spindle - $25
Short Side axle assemb. - SOLD
1979 Ford Bronco/F-150 Dana 44, 1/2 ton, 5.5 lug pattern. Complete outer set for disc/ drum conversion: 2 outer knuckles, 2 spindles, 2 hubs, 2 brake brackets, 2 calipers, 4 pads, 2 Warn lockouts - $150
Calipers not pictured, they were still on the truck.
1979 Ford Bronco/F-150 9" center section. 4.10 gear, 31 spline detroit locker, 1350 u-bolt style yoke. have housing with axles/ drums if you want you can have with it. Axle splines are about wiped out. - $400
Set of 5 - 35x12.50x15 General Grabbers on factory Ford Bronco wheels. Wheels are in good shape with a few chps to the clear coat.. Tires are 40-60% tread remaining. No rash or plugs. Will seperate $900 - SOLD
Ford 8.8 rear axle 3.73 gear used - $25
Early Ford F-450 Super Duty Front 4x4 axle. Axle is a Carrero 6.07. It has 5.13 gears, kingpin knuckles, Double cardon axle joints, drive flanges, & is currently set up for a 4 link with a panhard bar. It is 10 on 7.25 lug pattern. This thing is huge. It dwarfs a 60 front. This is the axle MH used for the 4x4 conversions on mid to late 90's F-450's. 2 wheels & tires included. More pics available. - $2000
All parts located 1 hour north of Memphis, Tn. Near Covington, TN. Can help deliver for gas money, or will ship small parts on your dime. Will consider interesting trades. Not looking for anything in particular.