joho75287
Well-Known Member
Got some stuff that is taking up space and I need to get rid of:
Have 4 saw 2.0s 14" travel.
Springs - 6ea 400lb, 4ea 250lb, 2ea 175lb
One needs a new rod end, which I will order on Monday 8/17 and get it on. 2 could use seal kits which are $22 on eBay for seals for 2 shocks. $750 for all 4 and the extra springs.
Deposit received on coil overs. Still have below items.
Hydro assist setup that came off my YJ with A D60. The steering box is from an astro van so the pitman faces forward so you can use it with a stretched front end. The box is nice and tight and the PSC hydro assist works as it should. I have the mounting brackets, tie Rod, drag link and frame to steering box support as well. The only reason I took it off is that I went to full hydro. $450 for all of it.
Hydro Assist sold.
Still have the 4.88s
Set of 4.88s for a 78/79 HP Ford D60. Good shape. No chips etc. $125
I'm in Denison Tx, will ship on buyers dime, but it won't be cheap based on weight and size of this stuff. I will be at GMP for Dixie run, if that helps anyone, and might be convinced to make a run to Hot Springs (will split fuel cost) if someone over thataway wants anything.
Sent from my iPhone using Tapatalk
Springs - 6ea 400lb, 4ea 250lb, 2ea 175lb
One needs a new rod end, which I will order on Monday 8/17 and get it on. 2 could use seal kits which are $22 on eBay for seals for 2 shocks. $750 for all 4 and the extra springs.
Deposit received on coil overs. Still have below items.
Hydro Assist sold.
Still have the 4.88s
Set of 4.88s for a 78/79 HP Ford D60. Good shape. No chips etc. $125
I'm in Denison Tx, will ship on buyers dime, but it won't be cheap based on weight and size of this stuff. I will be at GMP for Dixie run, if that helps anyone, and might be convinced to make a run to Hot Springs (will split fuel cost) if someone over thataway wants anything.
Sent from my iPhone using Tapatalk