H1 12 bolt o-rings

[Jwhite76]

I am looking to buy some o-rings for 12 bolt H1 wheels.
I bought some off eBay & they didn't fit . Any suggestions would be
greatly appreciated.

 

[poolman]

Too big or too small? I always put them on and put a big coat of 100 clear silicone around them. Mount everything and wait until the next day to put air in them. You won't have any issues if there tight.

 

[jccarter1]

If to small stretch them if to big cut and glue back with super glue or get 1/4 oring stock and make your own that is what I do

 

[hjpcummins]

Re:

Minr were small for TWF, stretched them and super glued them in

 

[Jwhite76]

They were too small so I tried stretching them & broke one .
I will try glueing it back together & see if that works. Thanks

 

[TBItoy]

get 1/4 oring stock and make your own that is what I do

That's what I do/have done in the past also

 

[kushKrawlin]

I used super glue to hold them together and a dab of rtv on the cut. Mine were to big. Weird huh.. No leaks at all. Oh and some silicon grease **** around the whole thing to keep it from pinching.

 

[Jwhite76]

I got some stock to make some we will see how it goes when I get off work tonight, thanks guys !!

 

[patooyee]

They are not a standard size. Anything you buy will be either slightly too big or too small. I've had best results making my own.