• Help Support Hardline Crawlers :

Sold/Expired HP D60 Reid knuckles yukons, ctms, DE ram high steer

blacksheep10

XBJRA champ/ 555 and team Nasty codriver
Joined
May 22, 2007
Messages
10,442
Location
Kansas, where we know how to wheel, nowhere to go
This is a copy and paste of my CL ad, so sorry if some of it is a little elementary:

I pulled this HP 60 out of a crawler I'm parting. It is a 1989 HP60 with 4.10 gears and a welded carrier. I probably have another carrier and have a ez locker in the box if need be for a few $ more.
It has a truss and double ended ram mount,
Reid racing/ Dedenbear knuckles
$329/side
High steer arms, one boughten, one homemade. Both have double shear mounts for the heim at the arm.
The kingpin kits were brand new when the knuckles were put on about 5 rides before it was parked. They are about $125 per side
The shafts are Yukon 4340 and the joints are CTM with 10 rides on them. Shafts and joints new are $1300 plus.
Warn drive flanges
1/4" cover
1410 ujoint with ubolts
The DE ram worked perfectly, I set the guy up with it and have ran them on 3 different rigs myself. It has -6 JIC fittings still on it. The tie rods are 3/4"x3/4" heim

I think all my contact info is in my sig
I'm in Paola, KS. if you aren't in a hurry we can surely set up a relay or something. $2200 for the whole unit, not really interest in parting it yet.



 

Latest posts

Back
Top