petzl21
Well-Known Member
*****SOLD******
*Jimmy's 4x4 Chassis 1.5" DOM (built by Pringle Fab in TX, finished around 2012). Bought from Chip (Pringle Fab) thru Pirate4x4 forum in 2013
*5.3L Vortec Engine Truck Intake reversed so intake in cab, Kevco Oil Pan
*TH400 Transmission – Red Clutches, 4L80 Clutch cage, Art Carr Shifter
*Atlas 4.3 Transfer Case
*1410 Drive shafts – Front and Back
*Rear Axle – Dana 60 Center, 14 Bolt Outers, GM Disc Brakes, 35 Spline Detriot, 5.38 Gears, New calipers/pads (Winter 2014)
*Front axle – GM60, Detroit, CTM axles and ujoints (1 season), Dedenbar Outer Knuckles with ARP studs, PSC 2.5 Double Ended Ram, PSC pump and resovior, Fully Trussed, Stage 8 Spindle Nuts, Flanged, Hydro Assist Brakes. Artec Industries ultimate high steer arms and bronze knuckle bushings. Full front axle seal rebuild and new spindles/bearings and Seals-it tube seals (winter 2014), New Calipers/Pads (Winter 2014)
*Trailready beadlocks (17's with 4" bS) 39" BFG Red Krawlers, 5 wheels, 5 tires (Tires/rims new as of May 2015) less than 4 runs on tires/rims, no leaks, plugs or patches. Spare is brand new
*16" ORI STX Struts with remote res on all 4 corners
*1-1/4" RuffStuff Heims and 1-1/4" FK heims, 2.25" solid alum lower links (2 runs on new lower links and heims, links from Wide Open Design), 2" x ¼" Wall DOM upper links
*25 Gallon Fuel Cell, dual fuel pumps with all the Ultra4 regulations requirements (except foam)
*Corbeau Race Seats with Crow 5 Point Harnesses (in like new shape)
*42" VisionX Light bar
*Ron Davis radiator with dual fans – capable to 800HP
*Warn XP9000i Winch with incab control
*Optima Yellow top battery
*Race Radios, Police Siren/Horn
All major electrical is on self re-settable circuit breakers
PO raced in DirtRiot and a few other races to iron out all the bugs and get suspension set up just right. NOT TAGGED for U4/KOH. I have been trail riding this rig since purchased, and love this buggy. Very reliable rig, that can do it all.
Reason for selling is the family is growing and need more seats, so looking for a 3-4 seat buggy now. Open to trades for the right rig, but cash is king.
Buggy is 83 wide. Fits into enclosed trailer no problem. I am 5'10" and 210, and fit no problem. Have a pic to show head room with me in buggy. I can get more pics, need to snap some of int.
$30k Located in Southington, CT
I had to ship it to get it from TX to CT, so open to working with new buyer to have it shipped.
Onto some pics:
With old lower links, but the new rims/tires as of May 2015
CTM's
With new lower links (tough to see)
Pic of links be4 install
Random Pics
*Jimmy's 4x4 Chassis 1.5" DOM (built by Pringle Fab in TX, finished around 2012). Bought from Chip (Pringle Fab) thru Pirate4x4 forum in 2013
*5.3L Vortec Engine Truck Intake reversed so intake in cab, Kevco Oil Pan
*TH400 Transmission – Red Clutches, 4L80 Clutch cage, Art Carr Shifter
*Atlas 4.3 Transfer Case
*1410 Drive shafts – Front and Back
*Rear Axle – Dana 60 Center, 14 Bolt Outers, GM Disc Brakes, 35 Spline Detriot, 5.38 Gears, New calipers/pads (Winter 2014)
*Front axle – GM60, Detroit, CTM axles and ujoints (1 season), Dedenbar Outer Knuckles with ARP studs, PSC 2.5 Double Ended Ram, PSC pump and resovior, Fully Trussed, Stage 8 Spindle Nuts, Flanged, Hydro Assist Brakes. Artec Industries ultimate high steer arms and bronze knuckle bushings. Full front axle seal rebuild and new spindles/bearings and Seals-it tube seals (winter 2014), New Calipers/Pads (Winter 2014)
*Trailready beadlocks (17's with 4" bS) 39" BFG Red Krawlers, 5 wheels, 5 tires (Tires/rims new as of May 2015) less than 4 runs on tires/rims, no leaks, plugs or patches. Spare is brand new
*16" ORI STX Struts with remote res on all 4 corners
*1-1/4" RuffStuff Heims and 1-1/4" FK heims, 2.25" solid alum lower links (2 runs on new lower links and heims, links from Wide Open Design), 2" x ¼" Wall DOM upper links
*25 Gallon Fuel Cell, dual fuel pumps with all the Ultra4 regulations requirements (except foam)
*Corbeau Race Seats with Crow 5 Point Harnesses (in like new shape)
*42" VisionX Light bar
*Ron Davis radiator with dual fans – capable to 800HP
*Warn XP9000i Winch with incab control
*Optima Yellow top battery
*Race Radios, Police Siren/Horn
All major electrical is on self re-settable circuit breakers
PO raced in DirtRiot and a few other races to iron out all the bugs and get suspension set up just right. NOT TAGGED for U4/KOH. I have been trail riding this rig since purchased, and love this buggy. Very reliable rig, that can do it all.
Reason for selling is the family is growing and need more seats, so looking for a 3-4 seat buggy now. Open to trades for the right rig, but cash is king.
Buggy is 83 wide. Fits into enclosed trailer no problem. I am 5'10" and 210, and fit no problem. Have a pic to show head room with me in buggy. I can get more pics, need to snap some of int.
$30k Located in Southington, CT
I had to ship it to get it from TX to CT, so open to working with new buyer to have it shipped.
Onto some pics:
With old lower links, but the new rims/tires as of May 2015
CTM's
With new lower links (tough to see)
Pic of links be4 install
Random Pics
