Eddyj
Well-Known Member
So I'm setting up my bumps and limit straps. The problem I'm having is with a narrow buggy and wide axles. The coilovers mount about 8 inches further out on the axles then the bumps. So when I place the axle all the way up at full bump it's fine, but when I drop the opposite side all the way down (full drop) the shock still compresses another couple of inches.
I wanted to leave 1 inch of shock showing no matter how extreme the axle articulated, problem is I'm eating up about 4 to 5 inches of shock travel.
Is this a common problem or my just overthinking it. If I roll or jump in land awkward I don't want to bottom out my shocks.
I wanted to leave 1 inch of shock showing no matter how extreme the axle articulated, problem is I'm eating up about 4 to 5 inches of shock travel.
Is this a common problem or my just overthinking it. If I roll or jump in land awkward I don't want to bottom out my shocks.