Sold/Expired MasterPull HD winch line and D60 Parts and D-shaft parts - Garage clean out

[petzl21]

I can work with buyer on shipping (shipping not included in prices). Buyer pays actual shipping costs. Parts are located in Southington, Ct 06489.

MasterPull 3/8 HD winch line, 100ft with sling hook. $838 brand new and is the best winch line on the market. Has a tough braided cover over the whole length of the line to protect the winch line underneath. Also spools up very neat and looks great! Only has about 4 light pulls on it. In near new shape, with no wear. always stored indoors.
$700

I have the following D60 parts leftover for sale:


2 BN Spicer 41886 kingpin bushings & 1 BN Spicer Oil Seal 48816 - $10

2 used D60 yokes with straps (not u-bolt style). had as trail spares - $70 for both. - SOLD
No pictures, have then wrapped up in shop rags and shrink wrapped!


1 BN Spicer Seal retainer kit and bearing 706395X (Kingpin bearing kit) - $50
(also have a spare used bearing in good shape i will throw in too, and another new kit minus the bearing).

2 BN DANA SPICER 3-28-97 1410 Series Weld Yoke - $40 for both. - SOLD
2 BN Spicer 5-1410x U-Joints - $40 for both. - SOLD

 

[Fire Freak]

What is the tube size on the weld yokes?

 

[bbtank45]

Shoot me a price for the (2) 1410 joints shipped to 45013. Thanks,

 

[petzl21]

Shoot me a price for the (2) 1410 joints shipped to 45013. Thanks,

I should be able to get it into a flat rate box. i think the small one is like $6 or $7. may have to take them out of boxes though but i can tape em up and flatten the boxes. let me know.

 

[petzl21]

What is the tube size on the weld yokes?

Thanks to Google

DANA SPICER 3-28-97

1410 Series Weld Yoke

Fits 3.0 inch OD X .083 wall tubing
F - Butt Diameter = 2.845
Series = 1410
Lock up style = OUTSIDE SNAP RING
E - Universal Joint Width = 4.187
D - Universal Joint Bore = 1.187
H - Center of u-joint bore to point of weld = 2.125
Special Notes: USE KIT 5-160X, 5-1410X

 

[petzl21]

Bump this up

 

[tommy450r]

I need the d60 yokes if they are 1410 I will also take the weld yokes and 1410 joints if they arnt sold.

 

[petzl21]

I need the d60 yokes if they are 1410 I will also take the weld yokes and 1410 joints if they arnt sold.

sent you a pm.

 

[petzl21]

Updated first post with parts that have sold.