Sold/Expired Misc. Drivetrain Parts For Sale!!!

[Hilbilly82]

Never ran chrome molly shafts with spicer u joints for 80s ford dana 60 $400 - SOLD!!
Ford dually front hubs $100
1 stock chevy long side dana 60 axle and stub shaft $10 - SOLD!!
1 pair of ford van dana 70 rear hubs $25
1 set of advance adapters LS-TJ motormounts $75 some surface rust from being stored in storage building. They are $175 from AA
1 Advance Adapters LS to nv4500/sm465 bellhousing never ran $100 over 400 from AA
1 80s Ford Dana 60 front narrowed 4 inches longside. Richmond 4.88s that need resetup and lockright locker. I will throw in both single and dual wheel hubs. Single wheel hubs have new but rusty rotors and new studs.No shafts $300 - SOLD!!
2 ford dana 44 fronts. 1-5 lug 1- 8 lug $200 each 8 lug -SOLD!!
1 jeep waggy dana 44 stock $100
Any questions text or call David at 256 783 3630. Parts located in New Market, AL

 

[Fire Freak]

Dibs on the stock chevy shafts

 

[CheapJ7]

Any pics of the waggy 44. Driver drop I assume. If it's a complete axle I'd be interested

 

[Hilbilly82]

Only have the long side stock chevy 60 shaft and stub for $10 the shafts in the pic is the ford chrome moly ones.

The waggy axle doesnt have the stock steering rods or lock out hubs but other than that its complete. I have some warn lock in hubs that came off another dana 44 I had that I would throw in for $25

The waggy axle is on bottom under the ford axle. I can pull it out of the shed a take a pic of it if you need me too.

 

[zjtrey]

pics of ford dually front hubs?

 

[Hilbilly82]

Ford dually hubs

 

[Hilbilly82]

I also have chevy nv4500 tailhousing and 32 spline output for $100 should be able to convert a 2 wheel drive or dodge NV4500 over with this setup.

 

[Hilbilly82]

TTT

 

[bigbchevy]

$200 on the chrome molly shafts?

 

[Hilbilly82]

Somebody bring me $650 for the narrowed front high pinion 60, with the chrome moly shafts and both single wheel and dual wheel hubs!

 

[bigbchevy]

$250 for shaft?


Sent from my iPhone using Tapatalk

 

[Hilbilly82]

I will take 300 and you pick em up

 

[tnjeep]

Is the waggy passenger or drivers side drop :****:

 

[Hilbilly82]

Driver drop

 

[Hilbilly82]

Make me some offers on this stuff! Needing some good q78 tsls, some 4.88s for a high pinion dana 30 and may do some trading on a 8.8 or 9 inch for my cherokee

 

[broncomike]

Make me some offers on this stuff! Needing some good q78 tsls, some 4.88s for a high pinion dana 30 and may do some trading on a 8.8 or 9 inch for my cherokee

I have a rear gc d44 with disk breaks i would trade towardes the nv4500.

 

[Hilbilly82]

Thanks but I have an xj and already has 8.25 under it. Looking more for something already built. With deeper gears and locker

 

[broncomike]

Thanks but I have an xj and already has 8.25 under it. Looking more for something already built. With deeper gears and locker

Ok still interested in the trans got to see what it will cost to put behind a 5.2 GC .

 

[crevise crawler]

Are the ford shafts 30 spline outers?

 

[broncomike]

Ok still interested in the trans got to see what it will cost to put behind a 5.2 GC .

Talked to a guy at AA can't make the trans work on a dodge.