OK, so here's where I'm at...
The lighting system is nuts on this... Everything is tied together threw an emergency type system, kinda like you'd see on an ambulance...
I believe that when I took off the stop sign, it made part of the system not work... I can only get the inside uppers front and back to flash, outside ones wont light off at all... The outside light were red and I think they were tied into the stop sign...
The tail lights work, but they flash with the blinkers...
And none of the marker light come on at all...
When it was decommissioned as a school bus they pulled a bunch of the toggle switches that work the safety stuff... So, there's a ton of loose wires with no rhyme or reason...
This yellow box has the uppers running to it, along with others...
They are coming from this block...
Some stuff goes to this...
And more to this...
At the top is the bottom side of the toggle panel...
Here's the toggle panel... All they left was the wipers and heaters plugged in...
I'm thinking I'll have to take everything apart and trace it all, one wire at a time... And of course, all this has to be done from the outside of the bus... Good thing it's always raining...