stroyer
Well-Known Member
I've been working on this since February, so I'll just post up some pics from the start. As I mentioned in the newbie thread, I'm a big fan of Coleworx and wanted to mimic the Riddler build, so I hope that's taken as a show of respect and not a ripoff.
I was going to go with a TJ tub setup, but that has changed as my build progressed. I'll be running the cowl area, hood and grille but rest will be skinned. Since I'm a first timer, I wanted to use a platform to easily build from and keep square. Started with tube laser cut 2x4x1/4 wall frame rails and went from there.
Specs below and still acquiring parts.
2003 5.3L (mild cam)
Rebuilt TH350
Dana 300 w/ Tera 4:1, twin sticks
Front Chevy D60, 5.13's, Detroit
Rear 14 Bolt, 5.13's, Full Spool
1.75"x1/8" wall DOM
118" wheelbase, 72" tall, 155" total Length
42x17
Profender 2.5", 16" coilovers, front & rear
Profender Airbumps
Our Trumpf Tube Laser
Click to watch video
![](http://i143.photobucket.com/albums/r152/Jeepinsker/th_VIDEO0007.jpg)
Hex holes are for 3/8" rivnuts used to bolt up flat plate
![Thumb thumb.gif thumb.gif](/styles/default/xenforo/smilies2/thumb.gif)
Specs below and still acquiring parts.
2003 5.3L (mild cam)
Rebuilt TH350
Dana 300 w/ Tera 4:1, twin sticks
Front Chevy D60, 5.13's, Detroit
Rear 14 Bolt, 5.13's, Full Spool
1.75"x1/8" wall DOM
118" wheelbase, 72" tall, 155" total Length
42x17
Profender 2.5", 16" coilovers, front & rear
Profender Airbumps
Our Trumpf Tube Laser
![IMAG0140.jpg](http://i143.photobucket.com/albums/r152/Jeepinsker/IMAG0140.jpg)
Click to watch video
![](http://i143.photobucket.com/albums/r152/Jeepinsker/th_VIDEO0007.jpg)
Hex holes are for 3/8" rivnuts used to bolt up flat plate
![IMAG0144.jpg](http://i143.photobucket.com/albums/r152/Jeepinsker/IMAG0144.jpg)