Sold/Expired need a full float 14 bolt

[awallen12]

looking for a 14 bolt rear end full float located in muscle shoals Al 256 415 1364 and i have some parts and axles if you are willing to trade.

 

[Weezul]

I've got a FF14 and Artecindustries truss. The truss is fully welded but not on the axle. Only thing I've done to the axle is removed the drums. It has an open diff. Would like $350 for both. Located in Memphis, TN.

 

[awallen12]

do you know what it is geared ?

 

[Weezul]

Nope. I only opened it to see if it was open. Pretty sure it is 3.xx. I know it hasn't been regeared.

 

[awallen12]

ok i have one im going to look at i will let you know something. thanks

 

[Weezul]

Here's a pic of them.

 

[awallen12]

does it just needs a disk brake conversion on it ?

 

[Weezul]

Yes. I've got the hubs for it on the workbench. Factory drum brakes were basically fused together and had to cut the backing plates to get them off. Found out is has 3.73 gears in it.

 

[thomasb1]

I got a 2004 Chevy factory 14 bolt out of a 2500 HD with factory disk brakes, factory locker, I m sure gears are 3.73 or 4.10, factory emergency brake set up etc. $350. [email protected]