smbroady82
Well-Known Member
Here is what I have going on
I bought the tg chromo solid axle hub replacements
https://www.trail-gear.com/TG/Solid_Axle_Hub__Creeper_Flange_Style/i_0_0_3543/_140435-1-KIT.aspx#.VOoxtuk5Bjo
Here is the difference in the new ones (right obviously) and what I assume are IFS style hubs that I guess I have been running the whole time ( had no idea the difference until now)
![](http://i1226.photobucket.com/albums/ee407/smbroady82/553E277E-C5D0-4C01-99A9-6BF59BFE3623_zps3povitag.jpg)
when I went to bolt everything back up the other day, there was not enough clearance to put the bolt thru the knuckle tabs & caliper hole and put a nut on it
![](http://i1226.photobucket.com/albums/ee407/smbroady82/CCC653A0-9061-46E3-8915-AB99DAC54BE0_zpskzug8us4.jpg)
here is the pass. side, you can see that there is enough room to run the bolt thru both and put the nut on
![](http://i1226.photobucket.com/albums/ee407/smbroady82/985D1867-EC7B-4222-A2F6-3E4F983C58FD_zpsfz2uubcb.jpg)
I just went to the parts store and bought what is supposed to be an 82 caliper and pads thinking maybe they would be tapped for the bolt..Wrong
So I get home and look at the caliper that I have been running for years and can't tell if they are any different at all.
![](http://i1226.photobucket.com/albums/ee407/smbroady82/8035556A-1E98-4147-B7A9-3F3CD2E444BD_zpsdjgtmomk.jpg)
![](http://i1226.photobucket.com/albums/ee407/smbroady82/FEF9FEB0-C0E8-45A9-B3CD-29CB2A85BAF2_zpsosychjj4.jpg)
So my question is: What am I doing wrong? Am I missing something? Wrong caliper or rotor?
This is a showstopper and I want to get it figured out today as I have to travel for work this week and will not have time to fool with it when I get back before the Gray Rock ride this weekend. Any help would be greatly appreciated.
I am close the truck and my lap top if anyone needs anymore pics to help
thanks guys
Broady
I bought the tg chromo solid axle hub replacements
https://www.trail-gear.com/TG/Solid_Axle_Hub__Creeper_Flange_Style/i_0_0_3543/_140435-1-KIT.aspx#.VOoxtuk5Bjo
Here is the difference in the new ones (right obviously) and what I assume are IFS style hubs that I guess I have been running the whole time ( had no idea the difference until now)
![](http://i1226.photobucket.com/albums/ee407/smbroady82/553E277E-C5D0-4C01-99A9-6BF59BFE3623_zps3povitag.jpg)
when I went to bolt everything back up the other day, there was not enough clearance to put the bolt thru the knuckle tabs & caliper hole and put a nut on it
![](http://i1226.photobucket.com/albums/ee407/smbroady82/CCC653A0-9061-46E3-8915-AB99DAC54BE0_zpskzug8us4.jpg)
here is the pass. side, you can see that there is enough room to run the bolt thru both and put the nut on
![](http://i1226.photobucket.com/albums/ee407/smbroady82/985D1867-EC7B-4222-A2F6-3E4F983C58FD_zpsfz2uubcb.jpg)
I just went to the parts store and bought what is supposed to be an 82 caliper and pads thinking maybe they would be tapped for the bolt..Wrong
So I get home and look at the caliper that I have been running for years and can't tell if they are any different at all.
![](http://i1226.photobucket.com/albums/ee407/smbroady82/8035556A-1E98-4147-B7A9-3F3CD2E444BD_zpsdjgtmomk.jpg)
![](http://i1226.photobucket.com/albums/ee407/smbroady82/FEF9FEB0-C0E8-45A9-B3CD-29CB2A85BAF2_zpsosychjj4.jpg)
So my question is: What am I doing wrong? Am I missing something? Wrong caliper or rotor?
This is a showstopper and I want to get it figured out today as I have to travel for work this week and will not have time to fool with it when I get back before the Gray Rock ride this weekend. Any help would be greatly appreciated.
I am close the truck and my lap top if anyone needs anymore pics to help
thanks guys
Broady