All parts located in Ashville, AL
Call or text Jacob 205-305-9973
Chassis $500 Sold
31x19x3 Ron Davis Radiator with Spal fans and relay kits $850 Sold
LS steam port and -16 fittings welded by Ron Davis. Has a few small burn marks from welding around it. Only used for mock up
12 gallon RCI fuel cell with Liquid Iron Industries dual pick up kit. Only used for mock up $200
Fox 2.0 2.5" travel air bumps. Only used for mock up $320 Sold
These have some surface blemishes from sitting in the cans and will need to be charged before use.
Single end PSC kit with P pump. $1250
Only used for mock up. Includes cooler and steering column with steering wheel and quick disconnect. I no longer have the short column that comes with the kit. I forgot to get the orbital and pump off the shelf so they are not pictured.
Twin stick 8 bolt GM passenger drop 205 $500
Rebuilt with all new bearings, new JB fab shift rods, new jb fab adjustable detents, new jb fab shift knobs, new slightly damaged twin stick shifter boot, new trail tech fab clocking ring, new trail tech fab rear support, high angle driveline forged 1410 rear yoke, spicer 1410 front yoke. Has not been run since rebuild.