DCXterra
#Fleamarketparts
Spider trax 3.5" Ultimate Housing with Unit Bearing housing ends already weld on with a True Bar. $800 for ale, $1000 with brand new 8x170 unit bearings.
Spider Trax 3.5" Ultimate Housing with Ultimate 60 Knuckles, not welded on, can weld on with a true bar if someone wants or leave them just sitting on it. Will separate if someone wants to buy the Knuckles first. $1400 together, $1000 knuckles $500 housing.
Also have brake brackets for the front and seals for both axles.
Unit bearings that will fit on housings.
Brand new never used stock 8x170 unit bearings. $200/pair
Chevy Dana 60, 4340 35 spline outers Warn locking hubs or ECGS flanges, Ballistic fab front diff cover, custom ram mount/skid made with 1.75" .250 wall dom and 1/4" plate, no carrier, 5.38 thin cut gears, high steer arms, artec truss with 4 link mounts for double triangulated. $1650
Jeep i6, fully rebuilt, new rings,seals,bearings, 1100 miles on it, might have 1200 after this weekend, full non-cut harness, interior and exterior, computer $500
AW4 transmission, new seals front and rear, $250, Also have a RAD designs Art Carr-Winters shifter for $350 or $550 combined
Dana 300 $250 has 1310 single u joint yoke front, 1310 cv yoke rear.
40" LTBs 40/16-17 4 have 1000 miles on them, dozen or so trips, 1 is brand new, never been used, $1600
Will sell rims and tires as a complete package for $2500 4 Trail ready beadlocks 4" BS and 1 regular steel rim.
Dana 44 LP with OX Cable locker, 3 4340 Axle shafts, One stock stub shaft, Yukon U joints, Warn locking hubs, 8x6.5 bolt pattern or 6x5.5 bolt pattern available.
Part out, $500 for OXSOLD , $300 for 4340 shafts and yukon u joints or will trade for detroit/grizzly for 14 bolt or 5.38 gears+install kit for SD 60.
2 Eibach 12x2.5x175 $50/ea
+shipping
18" 2.0 Fox Air shocks, have 600 miles on them, one knick in the sticker on one. No spacers. $400 SOLD
99-04 Frontier 00-04 Xterra Calmini SAS Kit Modified for 14" coilovers, one radius arm broke and was sleeved and welded.
Everything is OBO, send me offers. Will Ship anything. Located in Ormond Beach. FL.
Spider Trax 3.5" Ultimate Housing with Ultimate 60 Knuckles, not welded on, can weld on with a true bar if someone wants or leave them just sitting on it. Will separate if someone wants to buy the Knuckles first. $1400 together, $1000 knuckles $500 housing.
Also have brake brackets for the front and seals for both axles.
Unit bearings that will fit on housings.
Brand new never used stock 8x170 unit bearings. $200/pair
Chevy Dana 60, 4340 35 spline outers Warn locking hubs or ECGS flanges, Ballistic fab front diff cover, custom ram mount/skid made with 1.75" .250 wall dom and 1/4" plate, no carrier, 5.38 thin cut gears, high steer arms, artec truss with 4 link mounts for double triangulated. $1650
Jeep i6, fully rebuilt, new rings,seals,bearings, 1100 miles on it, might have 1200 after this weekend, full non-cut harness, interior and exterior, computer $500
AW4 transmission, new seals front and rear, $250, Also have a RAD designs Art Carr-Winters shifter for $350 or $550 combined
Dana 300 $250 has 1310 single u joint yoke front, 1310 cv yoke rear.
40" LTBs 40/16-17 4 have 1000 miles on them, dozen or so trips, 1 is brand new, never been used, $1600
Will sell rims and tires as a complete package for $2500 4 Trail ready beadlocks 4" BS and 1 regular steel rim.
Dana 44 LP with OX Cable locker, 3 4340 Axle shafts, One stock stub shaft, Yukon U joints, Warn locking hubs, 8x6.5 bolt pattern or 6x5.5 bolt pattern available.
Part out, $500 for OXSOLD , $300 for 4340 shafts and yukon u joints or will trade for detroit/grizzly for 14 bolt or 5.38 gears+install kit for SD 60.
2 Eibach 12x2.5x175 $50/ea
+shipping
18" 2.0 Fox Air shocks, have 600 miles on them, one knick in the sticker on one. No spacers. $400 SOLD
99-04 Frontier 00-04 Xterra Calmini SAS Kit Modified for 14" coilovers, one radius arm broke and was sleeved and welded.
Everything is OBO, send me offers. Will Ship anything. Located in Ormond Beach. FL.
