I bought this last year to try my hand racing in the Dirt Riot Series. Its built for the trail modified class. I was able to finish 1st place in the chocco and 4th at grayrock. It has a good parts list however there are some minor things wrong and its been beat up pretty good. I took it on a trial ride last month to chocco and it did fine. It rides and jumps pretty good.
Issues- front axle is tweaked it has negative camber which believe it or not helps the jeep steer better and the
rear main leaks. Also one coil spring is a little funky
This is a race jeep so theres no glass the front windshield is plexiglass. Theres no dash however I did leave the heater stuff so you wont get cold in the winter. The cage/seat combo will be tight for someone 6' and taller.
Anyhow heres the specs, everything is in working order may not look the best though.
1997 Jeep Cherokee
- 4.0L with 133K on the ticker
- Throttle Body spacer
- NP231 with SYE
- Identical drive shafts front and rear. Both are front shafts.
- K&N air filter
-Ironman engine brackets and mounts
Suspension
- King 2.5" 10" Reservior front shocks
- Bilstein 2.65" 14" Quad Bypass shocks in rear
- Custom built leaf spring perches
- Deaver Progressive 280 front 5.5" lift springs in front.
- Rubicon Express Superflex 3.5" leafs out back with 2" shackles.
Rear Axle is a Chrysler 8.25 29 spline
- Welded and plated spider gears in rear.
- OEM shafts
- Upgraded brake shoes.
- Nitro 4.88 8.25 gears.
- IronRock 8.25 truss.
- Tube diff guard
Front Axle is a Dana HP 30
- Revolution 4.88 gears
- Alloy USA complete chromo axle shafts and ujoints.
- Arctec truss
- Arctec C gussets
- Warn diff guard
- Currie johnny joints for UCAs
- Detroit TrueTrac mechanical LSD
- Currie Currectlync drag link
- Custom Ironman4x4fab aluminum tie rod with Currie TREs
- Ironman4x4fab trackbar
- Rusty's trackbar bracket
- Durango steering box
- 4 pass aluminum PS cooler
- 4 pass aluminum Transmission cooler.
- Full unibody stiffners front to rear
- Custom built 2x6 (clayton like style) long arm/transmission crossmember. Center can be removed for servicing trans/engine without removing suspension.
- 2" 1/4" wall custom longarms in front with bushings on both sides
- Summit racing racing seats
- 5 pnt Harnesses
- 8 pnt cage tied into sliders @ points around driver/codriver
- Custom sliders
- Custom rear light boxes with LED lights.
- Custom rear bumper
- Custom front bumper
- Smittybuilt 10K winch
- In cab winch controls
- ELS rear spot lights
- Yellow LED light bar on an aluminum bracket (racing light)
- Military style latch box for tools and parts in rear
- 4 Allied bead locks
- BFG KM1 35" MT's
- Hi Lift jack
Let me know if anymore pics are needed.. Located in Middle ga will help with delivery. Price is obo.. Not really looking for trades. 3500 obo
Issues- front axle is tweaked it has negative camber which believe it or not helps the jeep steer better and the
rear main leaks. Also one coil spring is a little funky
This is a race jeep so theres no glass the front windshield is plexiglass. Theres no dash however I did leave the heater stuff so you wont get cold in the winter. The cage/seat combo will be tight for someone 6' and taller.
Anyhow heres the specs, everything is in working order may not look the best though.
1997 Jeep Cherokee
- 4.0L with 133K on the ticker
- Throttle Body spacer
- NP231 with SYE
- Identical drive shafts front and rear. Both are front shafts.
- K&N air filter
-Ironman engine brackets and mounts
Suspension
- King 2.5" 10" Reservior front shocks
- Bilstein 2.65" 14" Quad Bypass shocks in rear
- Custom built leaf spring perches
- Deaver Progressive 280 front 5.5" lift springs in front.
- Rubicon Express Superflex 3.5" leafs out back with 2" shackles.
Rear Axle is a Chrysler 8.25 29 spline
- Welded and plated spider gears in rear.
- OEM shafts
- Upgraded brake shoes.
- Nitro 4.88 8.25 gears.
- IronRock 8.25 truss.
- Tube diff guard
Front Axle is a Dana HP 30
- Revolution 4.88 gears
- Alloy USA complete chromo axle shafts and ujoints.
- Arctec truss
- Arctec C gussets
- Warn diff guard
- Currie johnny joints for UCAs
- Detroit TrueTrac mechanical LSD
- Currie Currectlync drag link
- Custom Ironman4x4fab aluminum tie rod with Currie TREs
- Ironman4x4fab trackbar
- Rusty's trackbar bracket
- Durango steering box
- 4 pass aluminum PS cooler
- 4 pass aluminum Transmission cooler.
- Full unibody stiffners front to rear
- Custom built 2x6 (clayton like style) long arm/transmission crossmember. Center can be removed for servicing trans/engine without removing suspension.
- 2" 1/4" wall custom longarms in front with bushings on both sides
- Summit racing racing seats
- 5 pnt Harnesses
- 8 pnt cage tied into sliders @ points around driver/codriver
- Custom sliders
- Custom rear light boxes with LED lights.
- Custom rear bumper
- Custom front bumper
- Smittybuilt 10K winch
- In cab winch controls
- ELS rear spot lights
- Yellow LED light bar on an aluminum bracket (racing light)
- Military style latch box for tools and parts in rear
- 4 Allied bead locks
- BFG KM1 35" MT's
- Hi Lift jack
Let me know if anymore pics are needed.. Located in Middle ga will help with delivery. Price is obo.. Not really looking for trades. 3500 obo