I have a GM performance parts Ramjet 350 crate motor that I would like to sell. It has been in a rock crawler for about 2 years. I am currently parting out the crawler and this is why I am selling the motor. I use the crawler about once every 2 months so the motor has not seen much run time. I would figure in the last 2 year I have put 1,000 miles on it. This is a crawler so most of the miles have been at just over idle speeds. The motor has the original oil I put in it right after I got it, and it is still the same gold color it was when I poured it in the motor. About six months ago I had the computer tuned by OBD Diagnostics.
Ramjet Tuning, Ramjet 350, Ramjet 502, Ram Jet
This was primarily to boost performance but considering this is a mefi3 motor it also make up for the rich factory run setting cause my these motors not having O2 sensors. I have been able to see a remarkable difference in performance since having this done. The motor will be in the vehicle until it is sold. I am doing this so the new owner can hear it run. This is a pricey motor and I would expect to hear it run if I was the purchaser. The motor will include header, the aluminum pulleys and serpentine setup.
The only downside to the motor is it has been in a crawler so it is not show quality clean. However I am sure it could be cleaned up with little effort.
Here is some info on the motor itself:
P/N 12495515 â€" RAM JET 350 FACTORY FUEL INJECTION FOR YOUR HOTROD
You may recall the Ram Jet brand from the GM mechanical fuel injection systems of the 50’s. Back then everyone wanted a “fuelie†and today that’s even more true. GM Performance Parts has brought back the Ram Jet name with its all new electronic port fuel injection systems for small- block and big-block crate engines. The small-block Ram Jet 350’s intake manifold is styled like the Ram Jet of yesterday, but that is where the similarity ends. The all new Ram Jet 350 uses state of the art components developed by GM to give you all of the benefits of modern electronic engine management. Who better to fuel inject your hot rod than the people who build 5 million fuel injected cars and trucks per year, including the one in your driveway. Unlike some after market systems, Ram Jet offers great cold starts, hot starts, always ideal air to fuel ratios and exceptional throttle
response, power and driveabilty.
The all new 350 horsepower Ram Jet 350 from GM Performance Parts makes it easy to have electronic fuel injection on any 1978 or older vehicle originally equipped with a carburetor. The secret is the industry leading MEFI 3 controller. This new controller fits in the palm of your hand and was originally developed by GM Powertrain for marine applications. MEFI 3 is ideally suited for use in street rods, street machines and sportsman racers. Installation is simple, the Ram Jet 350 is an assembled 350 crate engine with Vortec cylinder heads, Ram Jet induction system, wiring harness, MEFI 3 controller, and detailed instructions. Once installed in the vehicle, a user needs only to supply 12V power and fuel. Please note the fuel pump recommendations in the Ram Jet instruction manual.
The Ram Jet 350 has it all, great nostalgic styling, driveabilty unsurpassed by carburetors or after market fuel injection, power to spare and a hot rod idle that sounds like Woodward Avenue in 1969 all over again.
GM Performance Parts is “ More Than Just Power†and once you’ve driven a Ram Jet you’ll understand why.
Here is what the motor cost new.
Chevrolet Part No. 12499120
$3500 obo don't be scared to make an offer.
I can ship if needed on your dime.
Call or txt 601-260-1070 Chris Barron
Ramjet Tuning, Ramjet 350, Ramjet 502, Ram Jet
This was primarily to boost performance but considering this is a mefi3 motor it also make up for the rich factory run setting cause my these motors not having O2 sensors. I have been able to see a remarkable difference in performance since having this done. The motor will be in the vehicle until it is sold. I am doing this so the new owner can hear it run. This is a pricey motor and I would expect to hear it run if I was the purchaser. The motor will include header, the aluminum pulleys and serpentine setup.
The only downside to the motor is it has been in a crawler so it is not show quality clean. However I am sure it could be cleaned up with little effort.
Here is some info on the motor itself:
P/N 12495515 â€" RAM JET 350 FACTORY FUEL INJECTION FOR YOUR HOTROD
You may recall the Ram Jet brand from the GM mechanical fuel injection systems of the 50’s. Back then everyone wanted a “fuelie†and today that’s even more true. GM Performance Parts has brought back the Ram Jet name with its all new electronic port fuel injection systems for small- block and big-block crate engines. The small-block Ram Jet 350’s intake manifold is styled like the Ram Jet of yesterday, but that is where the similarity ends. The all new Ram Jet 350 uses state of the art components developed by GM to give you all of the benefits of modern electronic engine management. Who better to fuel inject your hot rod than the people who build 5 million fuel injected cars and trucks per year, including the one in your driveway. Unlike some after market systems, Ram Jet offers great cold starts, hot starts, always ideal air to fuel ratios and exceptional throttle
response, power and driveabilty.
The all new 350 horsepower Ram Jet 350 from GM Performance Parts makes it easy to have electronic fuel injection on any 1978 or older vehicle originally equipped with a carburetor. The secret is the industry leading MEFI 3 controller. This new controller fits in the palm of your hand and was originally developed by GM Powertrain for marine applications. MEFI 3 is ideally suited for use in street rods, street machines and sportsman racers. Installation is simple, the Ram Jet 350 is an assembled 350 crate engine with Vortec cylinder heads, Ram Jet induction system, wiring harness, MEFI 3 controller, and detailed instructions. Once installed in the vehicle, a user needs only to supply 12V power and fuel. Please note the fuel pump recommendations in the Ram Jet instruction manual.
The Ram Jet 350 has it all, great nostalgic styling, driveabilty unsurpassed by carburetors or after market fuel injection, power to spare and a hot rod idle that sounds like Woodward Avenue in 1969 all over again.
GM Performance Parts is “ More Than Just Power†and once you’ve driven a Ram Jet you’ll understand why.
Here is what the motor cost new.
Chevrolet Part No. 12499120
$3500 obo don't be scared to make an offer.
I can ship if needed on your dime.
Call or txt 601-260-1070 Chris Barron
