ken ferman
Member
- Joined
- Nov 28, 2014
- Messages
- 7
120 " wheel base rock crawler with a 300 4.9 inline 6 ford on propane ford 4 spd np205
motor is new with only about 4 of 5 rides on it
new clutch , water pump , plugs wires cap , psc P pump
new radiator and fan
axles
front is a 93 dana 60 with Yukon molly shafts . new spool and gears (5.13) drive flanges
rear is a 14 bolt with Yukon molly shafts . it is welded with (5.13) gears and a 3/8 " rock cover and disk brakes
suspension is all 4 link with 1.25 rod ends and 2''alum bars
shocks , 16'' 2.0 king air
custom drive shafts with all 1350 joints
39.5x18-15 boggers about 80% all hold air well wheels are mwr beadlock
full hydro steering
20'' belly hight 74'' to top of cage
nice and light little crawler with cd player and cb raido
the guy that built it was 6'2'' I am 5'8'' so good all around it is ready to go needs nothing but a new home
trying to make room for new bouncer $13500 obo call Ken at 765 265 3999
it is located it Metamora IN about 1/2 way from indy to Cincinnati 47030 zip 5 miles from Haspin Acers offroad park
motor is new with only about 4 of 5 rides on it
new clutch , water pump , plugs wires cap , psc P pump
new radiator and fan
axles
front is a 93 dana 60 with Yukon molly shafts . new spool and gears (5.13) drive flanges
rear is a 14 bolt with Yukon molly shafts . it is welded with (5.13) gears and a 3/8 " rock cover and disk brakes
suspension is all 4 link with 1.25 rod ends and 2''alum bars
shocks , 16'' 2.0 king air
custom drive shafts with all 1350 joints
39.5x18-15 boggers about 80% all hold air well wheels are mwr beadlock
full hydro steering
20'' belly hight 74'' to top of cage
nice and light little crawler with cd player and cb raido
the guy that built it was 6'2'' I am 5'8'' so good all around it is ready to go needs nothing but a new home
trying to make room for new bouncer $13500 obo call Ken at 765 265 3999
it is located it Metamora IN about 1/2 way from indy to Cincinnati 47030 zip 5 miles from Haspin Acers offroad park