BustedKnucklefilms
Well-Known Member
- Joined
- Aug 24, 2009
- Messages
- 4,302
We just added our new Roll Cage kits to the Busted Knuckle Off Road Online store.
This is the same cage design we featured on Extreme UTV Tech
RZR ROLL CAGE BUILD - Extreme UTV Tech EP3
The Cage in a Box is what we installed at the UOR Expo this year
RZR build Live at the Unlimited Offroad Expo with Jake Burkey
This cage is designed around years of offroad knowledge. It has a low profile design that looks sleek but still has head room for safety. The cage is designed with a "HALO" bar above the occupants heads that allows water and mud to drip down into the bed of the RZR instead of down the back of your neck. The flat top design makes attaching a roof easy and because the roof is flat water and mud wont drip into the cockpit of the rzr keeping you dry. The front windshield bars Were designed for easy addition of windshield and chances are your current windshield will fit after trimming. The entire cage is triangulated so the cage is extremely strong and will hold strong in even the worst rollovers. The bars going from the front windshield to the halo bar behind the occupants head is designed for optimal head clearance reducing the risk of an occupant hitting their head during a crash.
A ton of though went into the design of the cage keeping safety and comfort number 1. Years of off roading experience went into the cage design, WE KNOW YOU WILL LOVE IT!
Cage in a box kits that you weld yourself are only $699
Fully welded out ready to bolt on cages are only $999
Order yours HERE- http://bustedknuckleoffroad.com/Roll-cages_c306.htm
(does not include front and rear bumpers)
This is the same cage design we featured on Extreme UTV Tech
RZR ROLL CAGE BUILD - Extreme UTV Tech EP3
The Cage in a Box is what we installed at the UOR Expo this year
RZR build Live at the Unlimited Offroad Expo with Jake Burkey
This cage is designed around years of offroad knowledge. It has a low profile design that looks sleek but still has head room for safety. The cage is designed with a "HALO" bar above the occupants heads that allows water and mud to drip down into the bed of the RZR instead of down the back of your neck. The flat top design makes attaching a roof easy and because the roof is flat water and mud wont drip into the cockpit of the rzr keeping you dry. The front windshield bars Were designed for easy addition of windshield and chances are your current windshield will fit after trimming. The entire cage is triangulated so the cage is extremely strong and will hold strong in even the worst rollovers. The bars going from the front windshield to the halo bar behind the occupants head is designed for optimal head clearance reducing the risk of an occupant hitting their head during a crash.
A ton of though went into the design of the cage keeping safety and comfort number 1. Years of off roading experience went into the cage design, WE KNOW YOU WILL LOVE IT!
Cage in a box kits that you weld yourself are only $699
Fully welded out ready to bolt on cages are only $999
Order yours HERE- http://bustedknuckleoffroad.com/Roll-cages_c306.htm
(does not include front and rear bumpers)