Sold/Expired **SOLD**Jeep Cherokee XJ Aftermarket Heavy Duty Front Driveshaft

[1slowhatch]

Heavy duty aftermarket front drive shaft. I used it on my '91 Jeep Cherokee XJ 4.0 5 speed with the factory high pinion D30. I'll get collapsed and extended measurements, as it may work in other applications. These are close to $250 new. Obviously this one is used and will need 1 u joint, the slip joint is good, tubing is straight, double cardan joint feels fine.





I'm asking $100. Located in Knoxville, TN. Can ship inexpensively through my job.

**SOLD**

 

[tonybolton]

Re:

1350 or 1410 u joints?

 

[sascommander184]

Re: Jeep Cherokee XJ Aftermarket Heavy Duty Front Driveshaft

Deffinitly get some deminsions

 

[1slowhatch]

Re: Jeep Cherokee XJ Aftermarket Heavy Duty Front Driveshaft

Deffinitly get some deminsions

I'll check when I get off work.

 

[1slowhatch]

Re: Jeep Cherokee XJ Aftermarket Heavy Duty Front Driveshaft

Deffinitly get some deminsions

Looks to be around 27" collapsed and 31" extended. However, I managed to damage the dust seal when collapsing the shaft all the way. On a trail rig, probably won't matter much anyway. These measurements are to the centerline of the joint on both ends.

 

[1slowhatch]

Re:

1350 or 1410 u joints?

I'm not what size, they're the same size as factory XJ. Direct bolt in.

 

[sascommander184]

Re: Jeep Cherokee XJ Aftermarket Heavy Duty Front Driveshaft

1310 I recon...... Let me get sum measurements and I may take it .... Is it supposed to be a longer slip than factory?

 

[1slowhatch]

Re: Jeep Cherokee XJ Aftermarket Heavy Duty Front Driveshaft

1310 I recon...... Let me get sum measurements and I may take it .... Is it supposed to be a longer slip than factory?

I don't have a stock one to compare, but i would guess it's a longer slip.

 

[1slowhatch]

Re: Jeep Cherokee XJ Aftermarket Heavy Duty Front Driveshaft

Bump!

 

[1slowhatch]

SOLD.