Well it has come time to sale the old ride since I have worked the bugs out of the new one. I have worked the bugs out of the old ride and has been a good dependable buggy and has done a lot of wheeling. The buggy was tore down 2 years ago and re-powder coated with new aluminum interior, fiberglass hood and rebuilt all the suspension. It was only wheeled a hand full of times before I bought a new project and has been sitting in storage. Here are the specs:
GM crate engine 385 Fast Burn with Howell multiport Injection.
TCI Turbo 350 with hardened sprags and heavy duty clutches to handle 550hp. Tci RV Converter.
Stak 3 speed transfer case.
1.75"od x 1"id Chromoly drive shafts front and rear.
Front Diff: 2.5 Rockwells with 2'' Ouverson shafts, spool, brakes and drive flanges.
Rear Diff: Ouverson oem replacement shafts, drive flanges and brakes.
Viair onboard air.
Premier on board welder with HD 190 amp alt.
PSC steering.
46'' Baja Claws with MRT double beadlock wheels. Probably 50% tread. ( I have an extra set if you want to buy them. DO NOT ASK TO BUY THEM SEPERATE)
3 seater or you can put in a bench seat in the rear.
Cooler and tool bag rack.
All hubs have been drilled for greasing the brg's and
keeping them full of grease.
3 linked front and rear with bushings and johnny joints.
15-17 gallon fuel cell.
Fox 2.5'' air shocks on the front.
Fox 2''air shocks on the rear.
2- 8'' Vision X lights.
9000# RC winch up front.
1500# winch in rear.
124'' Wheel base
24'' Belly pan height at 5 psi.
I know that I have forgot something so feel free to call me with any questions at 281/844-6576 Paul
Location: Tomball, Texas
$15,000.00
Pictures: http://www.flickr.com/photos/91345793@N04/
GM crate engine 385 Fast Burn with Howell multiport Injection.
TCI Turbo 350 with hardened sprags and heavy duty clutches to handle 550hp. Tci RV Converter.
Stak 3 speed transfer case.
1.75"od x 1"id Chromoly drive shafts front and rear.
Front Diff: 2.5 Rockwells with 2'' Ouverson shafts, spool, brakes and drive flanges.
Rear Diff: Ouverson oem replacement shafts, drive flanges and brakes.
Viair onboard air.
Premier on board welder with HD 190 amp alt.
PSC steering.
46'' Baja Claws with MRT double beadlock wheels. Probably 50% tread. ( I have an extra set if you want to buy them. DO NOT ASK TO BUY THEM SEPERATE)
3 seater or you can put in a bench seat in the rear.
Cooler and tool bag rack.
All hubs have been drilled for greasing the brg's and
keeping them full of grease.
3 linked front and rear with bushings and johnny joints.
15-17 gallon fuel cell.
Fox 2.5'' air shocks on the front.
Fox 2''air shocks on the rear.
2- 8'' Vision X lights.
9000# RC winch up front.
1500# winch in rear.
124'' Wheel base
24'' Belly pan height at 5 psi.
I know that I have forgot something so feel free to call me with any questions at 281/844-6576 Paul
Location: Tomball, Texas
$15,000.00
Pictures: http://www.flickr.com/photos/91345793@N04/
