jcorlew24
Well-Known Member
Well I have been kicking around the idea of selling my buggy and the wife just sealed the deal a couple of nights ago when she told me she wants another little one. I also have a 16ft. enclosed trailer and truck that I can make a package deal on. Here are the package options:
$32,500 for buggy
TRUCK IS SOLD
TRAILER IS SOLD
Buggy Specs:
Motor
Recently built LS6 aluminum block 430 Rwhp on safe tune
The motor was built by a corvette engine builder in Murfreesboro TN, I can't remember the name. I will find out the name and specs on the enigine Monday.
Custom Long Tube Headers by Wilson Performance
Custom engine cover to keep heat off the fuel rails by Wilson Performance
New Mobile 1 Full Synthetic Fluid
Transmission:
Hughes built Powerglide
Tranny was recently rebuilt
Braided Steel Lokar dipstick
TCI shifter
Huge Custom Transmission Cooler with Fan
Transfer Case
Atlas 3.8
Comp Cut gears
32 spline outputs
1410 Rear Yoke
1350 Front Yoke
Rear tailshaft support
Front Axle
Spyder 9 housing
35 Spline CTM inner shafts
New Yukon 35 Spline 4340 outter shafts
Newly Rebuilt CTM joints
Crane steering Knuckles, Steering Arms, and Inner C's
Longfield Spindle sleeves (replaced rolling spindle bearings)
6:20 Pro Gears a couple of rides on them
Yukon Full Spool
Trussed
Yukon Drive Slugs
Stainless Brake Lines
Just serviced axle
Rear Axle
Fab 9 Housing
Moser 35 spline shafts
Pro Gear 6:20's
Yukon Full Spool
Disc Brakes
Barnes 4WD Pinion Guard
Stainless brake lines
Trussed
Suspension
ORI Struts on all 4 corners
Profender Bumps on all 4 corners
3 link front with 7075 links
4 link rear with 7075 links
Chromolly heims with a couple of rides on them
Anti Rock rear
Steering
PSC P pump has been modified for faster steering
PSC orbital
Trail Gear Double Ended Ram
New Royal Purple Fluid
Steering Cooler
Wheels and Tires
3- Newer 17" Trail Gear Creeper Locks
1- Brand New 17" Trail Gear Creeper Lock
1- Spare Trail Gear Wheel has been cracked and Needs Repair
4- Newer 40 Maxxis Treps Competition Compound
1- Maxxis Creepy Crawler Competition Compound
One of the wheels has had a small crack tigged on it. I use if for the spare with the Creepy mounted on it.
Interior
Mastercraft suspension seats
12 Voly Guy Switch panel
Lowrance GPS
New PRP Padded 5 point harnesses
New RCI Dual Fresh Air Pumpers With Hoses
Huge Rear Mounted Radiator with custom Guard and Dual Fans
Misc:
Recently wrapped with laminate, so numbers and stickers are removeable
Warn Winch with Competition Synthetic Cable
3 sets of Lazer LED light bars
Jaz fuel cell with quick fill tube
Dual Walbro pickups, you can run tank completly empty
Rear mounted Amber light and brake lights
Rear Trail Gear winch with synthetic cable, not operational at the moment probably due to bad selenoid
Strange full nodular third member complete with 4:88's and yukon spool
2- Sets of Yukon 4:88 gears
2- Sets of Nitro 6:20 gears
1- New PTC Torque Converter
1- B&M Shifter Cable
extra dipstick and tranny pan for transmission
set of 4340 outer stub shafts
Liquid Iron Side Mirrors
Window Nets
Optima Red Top Battery
Twisted Customs Modified Jeep Cherokee Hood
I am sure I am missing a lot of stuff and I am posting this while I am out of town. I will be updating the post as stuff hits me. This is a really good looking buggy that has a nasty motor, and a lot of money invested in it. I am asking $32,500 for the buggy.
If interested you can call or text me at 615-456-7185.
$32,500 for buggy
TRUCK IS SOLD
TRAILER IS SOLD
Buggy Specs:
Motor
Recently built LS6 aluminum block 430 Rwhp on safe tune
The motor was built by a corvette engine builder in Murfreesboro TN, I can't remember the name. I will find out the name and specs on the enigine Monday.
Custom Long Tube Headers by Wilson Performance
Custom engine cover to keep heat off the fuel rails by Wilson Performance
New Mobile 1 Full Synthetic Fluid
Transmission:
Hughes built Powerglide
Tranny was recently rebuilt
Braided Steel Lokar dipstick
TCI shifter
Huge Custom Transmission Cooler with Fan
Transfer Case
Atlas 3.8
Comp Cut gears
32 spline outputs
1410 Rear Yoke
1350 Front Yoke
Rear tailshaft support
Front Axle
Spyder 9 housing
35 Spline CTM inner shafts
New Yukon 35 Spline 4340 outter shafts
Newly Rebuilt CTM joints
Crane steering Knuckles, Steering Arms, and Inner C's
Longfield Spindle sleeves (replaced rolling spindle bearings)
6:20 Pro Gears a couple of rides on them
Yukon Full Spool
Trussed
Yukon Drive Slugs
Stainless Brake Lines
Just serviced axle
Rear Axle
Fab 9 Housing
Moser 35 spline shafts
Pro Gear 6:20's
Yukon Full Spool
Disc Brakes
Barnes 4WD Pinion Guard
Stainless brake lines
Trussed
Suspension
ORI Struts on all 4 corners
Profender Bumps on all 4 corners
3 link front with 7075 links
4 link rear with 7075 links
Chromolly heims with a couple of rides on them
Anti Rock rear
Steering
PSC P pump has been modified for faster steering
PSC orbital
Trail Gear Double Ended Ram
New Royal Purple Fluid
Steering Cooler
Wheels and Tires
3- Newer 17" Trail Gear Creeper Locks
1- Brand New 17" Trail Gear Creeper Lock
1- Spare Trail Gear Wheel has been cracked and Needs Repair
4- Newer 40 Maxxis Treps Competition Compound
1- Maxxis Creepy Crawler Competition Compound
One of the wheels has had a small crack tigged on it. I use if for the spare with the Creepy mounted on it.
Interior
Mastercraft suspension seats
12 Voly Guy Switch panel
Lowrance GPS
New PRP Padded 5 point harnesses
New RCI Dual Fresh Air Pumpers With Hoses
Huge Rear Mounted Radiator with custom Guard and Dual Fans
Misc:
Recently wrapped with laminate, so numbers and stickers are removeable
Warn Winch with Competition Synthetic Cable
3 sets of Lazer LED light bars
Jaz fuel cell with quick fill tube
Dual Walbro pickups, you can run tank completly empty
Rear mounted Amber light and brake lights
Rear Trail Gear winch with synthetic cable, not operational at the moment probably due to bad selenoid
Strange full nodular third member complete with 4:88's and yukon spool
2- Sets of Yukon 4:88 gears
2- Sets of Nitro 6:20 gears
1- New PTC Torque Converter
1- B&M Shifter Cable
extra dipstick and tranny pan for transmission
set of 4340 outer stub shafts
Liquid Iron Side Mirrors
Window Nets
Optima Red Top Battery
Twisted Customs Modified Jeep Cherokee Hood
I am sure I am missing a lot of stuff and I am posting this while I am out of town. I will be updating the post as stuff hits me. This is a really good looking buggy that has a nasty motor, and a lot of money invested in it. I am asking $32,500 for the buggy.
If interested you can call or text me at 615-456-7185.