Sold/Expired Sold!

jwilson645 · Jun 7, 2013

No title available so it's being sold for parts only. It's wrecked (bent frame) but is still complete. I think the only thing that has been removed from it is the side mirrors. Lots of good parts still there.

Everything is still on the truck right now but we'll start stripping it in the next couple of weeks. If you need it sooner, let me know and we can arrange you or I to pull them.

Let's try to price some things..... All prices are with you pulling it. Me pulling and shipping will be more.

engine (approx. 150k miles)- $150 (no shipping)
wiring harness with PCM- $75
4speed trans- $200 (no shipping)
transfer case- $150 (no shipping)
front 10 bolt- $100 (no shipping)
rear 10 bolt (broken axle shaft)- $50 (no shipping)
leaf springs- $100 for all 4
good short bed- $350 (no shipping)
passenger door- $25 (has a bullet hole in the center. see pic)
passenger fender- $50
6 lug rally wheels no center caps or trim rings- $100 for all 4
rear painted step bumper- $50
steering column- $50
tailgate(still in great shape)- $125

If you need anything I don't have listed, ask and I'll see if it's there.

blzrgb · Jun 7, 2013

Re: 1987 Chevy 1/2t swb 4x4- $600 or part out

how much for all the A/C duct work from blower motor housing all the way to drivers side And maybe that tilt column ?

jwilson645 · Jun 7, 2013

Re: 1987 Chevy 1/2t swb 4x4- $600 or part out

blzrgb said:
how much for all the A/C duct work from blower motor housing all the way to drivers side And maybe that tilt column ?

$100 and you pull it?

It's in Crane Hill, AL

fatz87xj · Jun 7, 2013

Re: 1987 Chevy 1/2t swb 4x4- $600 or part out

How much for motor trans and transfer case

jwilson645 · Jun 7, 2013

Re: 1987 Chevy 1/2t swb 4x4- $600 or part out

fatz87xj said:
How much for motor trans and transfer case

$500?

jwilson645 · Jun 10, 2013

Re: 1987 Chevy 1/2t swb 4x4- part out

bump

jwilson645 · Jun 11, 2013

Re: 1987 Chevy 1/2t swb 4x4- part out

updated

jwilson645 · Jun 13, 2013

Re: 1987 Chevy 1/2t swb 4x4- part out

ttt

tc1 · Jun 13, 2013

Re: 1987 Chevy 1/2t swb 4x4- part out

interested in colum and tcase need input spline info

jwilson645 · Jun 13, 2013

Re: 1987 Chevy 1/2t swb 4x4- part out

tc1 said:
interested in colum and tcase need input spline info

Will be a couple weeks before I can get the drivetrain pulled and check the splines. It's a NP208 mated to a SM465.

tc1 · Jun 13, 2013

Re: 1987 Chevy 1/2t swb 4x4- part out

If its a 32 spline it and the column are sold

jwilson645 · Jun 13, 2013

Re: 1987 Chevy 1/2t swb 4x4- part out

tc1 said:
If its a 32 spline it and the column are sold

Ok. I will try to get them out as soon as I can. Got to get it pulled down to the house out of the weeds.

jwilson645 · Apr 23, 2014

Re: 1987 Chevy 1/2t swb 4x4- part out

Still have this. Only things I've pulled off are the door mirrors and rear speaker brackets. Everythign else is up for grabs.

grcthird · Apr 23, 2014

Re: 1987 Chevy 1/2t swb 4x4- part out

You need to just go ahead and make that longbed you drive a shortbed 4x4 with all those parts. :dblthumb:

jwilson645 · Apr 23, 2014

Re: 1987 Chevy 1/2t swb 4x4- part out

grcthird said:
You need to just go ahead and make that longbed you drive a shortbed 4x4 with all those parts.

I've thought about it but Big Red is like driving a big ole comfy couch. :****:

jgreen · Apr 23, 2014

Re: 1987 Chevy 1/2t swb 4x4- part out

How much for the clutch pedal shipped to tn 37375 if it's a hydraulic setup

mrdana60 · Apr 23, 2014

Re: 1987 Chevy 1/2t swb 4x4- part out

Interested in tilt column and the 4 speed shifter boot and ring and the 4 speed shifter ?

jwilson645 · Apr 24, 2014

Re: 1987 Chevy 1/2t swb 4x4- part out

jgreen said:
How much for the clutch pedal shipped to tn 37375 if it's a hydraulic setup

It is hydro, if I remember correctly. I can verify this weekend though (it isn't at my house). $75 plus shipping on the clutch/brake assembly. Not sure what shipping would be until I pull it out.