Steering help

[Ricky 79cj-7]

I noticed that my Jeep turns sharper to the right than to the left. The turning radius is probably about 2-3 feet different when measuring the tire tracks on the ground. There is no obvious sign of bent tie rod, drag link, pitman arm,etc.

Does this make sense for adjusting?
take drag link off pitman arm, center steering box by turning full lock right, full lock left, find center, then adjust heim on drag link to align with pitman arm, reinstall drag link

 

[Cracksrubi]

That's what's my xj did after the lift till I got it aligned. But it was more noticeable

 

[tommy450r]

U might need a shorter drag link. When I built the hd steering on my yj I cut my drag link a little long an it done that..

 

[Ricky 79cj-7]

I've got heims on both ends of the drag link, so if that is the case I should be able to adjust it quite a bit.