For Sale
6.0 LQ9 from 2006 Escalade 55k Miles, Kevco Oil Pan and Hooker Headers ARP Rod Bolts, FAST EZ-EFI, 92mm throttle body, Comp cams cam and upgraded springs, Electric water pump
Built TH350 w/ Manual Valve Body and Art Carr
Atlas II 4.3
TORQ 14 Bolt Front/ TORQ third member/ 300m RCV Shafts/ Crane Knuckles/ Crane inner C's/ Spool/ 4.10/ Racing in the dirt aluminum hubs
TORQ 14 Bolt Rear/ TORQ third member/ Spool/ 4.10/ Racing in the dirt aluminum hubs
14" ORI STX Struts Front/ 16" ORI STX Struts Rear
43" SX Stickys 70% on 17" Raceline Custom Forged Double Beadlocks
1 Spare SX Sticky – New
2 Spare Raceline Aluminum Beadlocks
2-42" Cut Boggers on Raceline Aluminum beadlocks - New
119" Wheelbase/ 69" to Top of Cage, 22" Belly, 51" at Widest Point
Main Chassis- 1 3/4 .120 Wall DOM
Uprights and B-Pillars 1 3/4 .188 Wall DOM
Bottom Frame rails 1 3/4 .250 Wall DOM
Corbeau Seats/ Crow Harnesses
MWP Chromolly Heims 1 1/4 and 3/4
12Volt Guy Switch Panel
PSC Purpose Built Steering Pump and Reservoir
Custom Four Seasons Dual Pass Radiator/Zirgo Fan
Derale Dedicated Trans Cooler w/Fan
PSC Steering Ram
GloShift Digital Gauges
Coyote Gear 8 Gallon Fuel Cell w/3 baffles
Aeroquip Fuel Pump/Corvette Regulator
Wilwood 4 piston calipers and wilwood rotors
TCI Deep Trans Pan
NW Fab Atlas Support Ring
Lots of Spares
It needs a new master cylinder installed, I have that. The rear axle needs to be resealed at the 3rd member and the driver side.
Buggy is located in Southaven, MS - just south of Memphis.
Asking $35,000 Will entertain interesting trades
Please call or text 662-312-1381 Justin
6.0 LQ9 from 2006 Escalade 55k Miles, Kevco Oil Pan and Hooker Headers ARP Rod Bolts, FAST EZ-EFI, 92mm throttle body, Comp cams cam and upgraded springs, Electric water pump
Built TH350 w/ Manual Valve Body and Art Carr
Atlas II 4.3
TORQ 14 Bolt Front/ TORQ third member/ 300m RCV Shafts/ Crane Knuckles/ Crane inner C's/ Spool/ 4.10/ Racing in the dirt aluminum hubs
TORQ 14 Bolt Rear/ TORQ third member/ Spool/ 4.10/ Racing in the dirt aluminum hubs
14" ORI STX Struts Front/ 16" ORI STX Struts Rear
43" SX Stickys 70% on 17" Raceline Custom Forged Double Beadlocks
1 Spare SX Sticky – New
2 Spare Raceline Aluminum Beadlocks
2-42" Cut Boggers on Raceline Aluminum beadlocks - New
119" Wheelbase/ 69" to Top of Cage, 22" Belly, 51" at Widest Point
Main Chassis- 1 3/4 .120 Wall DOM
Uprights and B-Pillars 1 3/4 .188 Wall DOM
Bottom Frame rails 1 3/4 .250 Wall DOM
Corbeau Seats/ Crow Harnesses
MWP Chromolly Heims 1 1/4 and 3/4
12Volt Guy Switch Panel
PSC Purpose Built Steering Pump and Reservoir
Custom Four Seasons Dual Pass Radiator/Zirgo Fan
Derale Dedicated Trans Cooler w/Fan
PSC Steering Ram
GloShift Digital Gauges
Coyote Gear 8 Gallon Fuel Cell w/3 baffles
Aeroquip Fuel Pump/Corvette Regulator
Wilwood 4 piston calipers and wilwood rotors
TCI Deep Trans Pan
NW Fab Atlas Support Ring
Lots of Spares
It needs a new master cylinder installed, I have that. The rear axle needs to be resealed at the 3rd member and the driver side.
Buggy is located in Southaven, MS - just south of Memphis.
Asking $35,000 Will entertain interesting trades
Please call or text 662-312-1381 Justin
