I am selling my rock crawler project. I don't have time to work on it and finish it. I have 95 percent of the parts. It has a Dana 60 Ford high pinion front axle with 3.54 gear; 14 bolt rear with 4.11 gear, I haven't decided what gear ratio to run yet. The 3.54 gear worked good with the transmission with the doubler system. Has a 400 turbo with a 203 to 205 left hand drop. I have a couple of options as far as engines. I have a new set of 44" Super Swampers that have about 4 trips on them, bought new. As you can see in the pictures, I have tacked the 4 link bars and tabs frame is welded, it has heim joints and bushings, quarter wall four link bars, I have the seats. It is almost a rolling chassis, it needs front shocks mounted. This is a professionally built tubular chassis built by Shawn Pettit of Tampa Florida. It is set up for an LS motor, but I have not purchased an LS motor for it but have a good running 350 for it. I also have a 427 small block started for it no heads on it and is all new. I do have a couple of old school motors. It starts at $10,000 basic rolling chassis and can go up to 16,000 with with the 427 small block. I will consider trade for a Razor 900 or 1000. I prefer phone calls. No calls after 9:30 p.m. please. 423-650-078zero thanks Wally