What 4 and 5" springs are you running on your toy?

[crash2]

So--what springs are you running and how are they holding up? Need to start collecting parts for the wifes rig.

How are they holding up and how is the ride quality...

 

[Eric]

Sas?

 

[crash2]

Sas?

yuppers.. I have only used the rancho 44044's on rigs I have done and they seem to hold up well and might go that route. But I figured I would see what everybody else is running...

 

[426rider]

Rears up front. Probably near 4" or maybe just under. Have held up better than the waggys I had before. On the rear YJ main Waggy bastard pack. Have held up better than other packs, probably because I have an anti wrap now.

 

[GRNTACO]

Marlins 4" are working good on my truck. Get the USA version mabe by Betts Spring.

Or you could go Trail Gear.

 

[rickibrat2]

running 5 inch trail gear
started with 5 inch sky jacker ones but bent them first weekend out

 

[no excuses]

rears up front and SAW's in rear:awesomework:

fronts have worked great for me for a while now..

 

[Mark m.]

Skyjacker up front been on my truck for about 10 years and seem to work pretty good. I think they started out as 5" but are about 3" now. Waggys in the rear.

 

[Dain Bramage]

my TG springs seem to do pretty well, but i dont have any experience with anyone elses springs.

 

[jeffs88toy]

:beer: My 88 4runner has 3'' trail gear f/r and 37'' i-rock . I move the front axle 5'' forawd work great you see it .

 

[Rhino1]

Stock 5 leaf Waggies front and rear. Rides nice and smooth. good flex. Will need an anti-wrap bar though.

 

[Dain Bramage]

:beer: My 88 4runner has 3'' trail gear f/r and 37'' i-rock . I move the front axle 5'' forawd work great you see it .

yea, thats what i have, except i have 33" BFGs. works pretty good.:awesomework:

 

[militaryota]

:redneck: your old ones:beer:

 

[joeyf]

i am running 4" alcans keeps my truck low and get a lot of flex out of them

 

[crash2]

:redneck: your old ones:beer:

I have a VERy large stash of springs so I just might make a set--just looking at the options

 

[tj40ounce]

rears up front and SAW's in rear:awesomework:

fronts have worked great for me for a while now..

x 2

 

[stealthrunner1]

4" marlins in the front and what ever ends up in the rear after i toss the 63" chevys!!!

 

[Grommit327]

I'm running Marlin's overseas spring...and they are completely flat.


So don't buy them

 

[crash2]

4" marlins in the front and what ever ends up in the rear after i toss the 63" chevys!!!

I refuse to ever use the POS chev's..:;

 

[skrause]

Alcans, lots of use and no issues or sagging.:awesomework: