dawg bones
Well-Known Member
- Joined
- Jul 3, 2011
- Messages
- 74
Getting a divorce and need to sell stuff. I have a few FJ40 parts and a V8 YJ project up for sale:
Ball Ground, GA 30107
Jeep stuff:
The YJ has a EFI 5.9 Magnum from a 93 Dodge 1500 (push button O/D off intact and working) with a 46rh automatic. Runs great. The tub is comp cut with a custom frame for TJ back half and already has (front and rear) 4 link brackets and 2wd Saginaw pump for hydro assist steering. CJ front clip and flat fenders all built into the sliders. Full roll cage that allows for factory tops to still be used. Bestop canvas top and doors with YJ half doors. Gas tank has been inboarded to allow room for 1 tons and no typical Wrangler gas tank ass drag. Its on Jack stands cause I don't have the axles anymore, but easily loaded on a trailer no problem.
YJ project (with an 84 CJ VIN plate...if wanted) $1500
FJ40 stuff:
79 FJ40 axles: 4.10's, open/ open, Disc brake conversion. still spring under..... I would trade the axles for a set of FJ80 axles (plus cash) or a built, ready to roll, leaf spring over FJ60/62 front axle or a set of newer beadlocks plus cash depending on condition of the wheels (17x9)
Sell out right -$500
2F FJ40 I6 motor-$750 and you pull it, $850 I pull it. Runs strong.
GM SM420 trans-$200
3spd Land Cruiser transfer case-$150 (sell 420 and Cruiser T/C mated together $300)
35x12.50x15 KM2s mounted on steel wheels with about 90-95% tread-$750 [size=10pt]SOLD[/size]
To clear the yard completely:
$3500 or best reasonable offer for all the above and I'll throw in 4 8" off road lights
PM for info or offers
Ball Ground, GA 30107
Jeep stuff:
The YJ has a EFI 5.9 Magnum from a 93 Dodge 1500 (push button O/D off intact and working) with a 46rh automatic. Runs great. The tub is comp cut with a custom frame for TJ back half and already has (front and rear) 4 link brackets and 2wd Saginaw pump for hydro assist steering. CJ front clip and flat fenders all built into the sliders. Full roll cage that allows for factory tops to still be used. Bestop canvas top and doors with YJ half doors. Gas tank has been inboarded to allow room for 1 tons and no typical Wrangler gas tank ass drag. Its on Jack stands cause I don't have the axles anymore, but easily loaded on a trailer no problem.
YJ project (with an 84 CJ VIN plate...if wanted) $1500
FJ40 stuff:
79 FJ40 axles: 4.10's, open/ open, Disc brake conversion. still spring under..... I would trade the axles for a set of FJ80 axles (plus cash) or a built, ready to roll, leaf spring over FJ60/62 front axle or a set of newer beadlocks plus cash depending on condition of the wheels (17x9)
Sell out right -$500
2F FJ40 I6 motor-$750 and you pull it, $850 I pull it. Runs strong.
GM SM420 trans-$200
3spd Land Cruiser transfer case-$150 (sell 420 and Cruiser T/C mated together $300)
To clear the yard completely:
$3500 or best reasonable offer for all the above and I'll throw in 4 8" off road lights
PM for info or offers
