• Help Support Hardline Crawlers :

Sold/Expired YJ project PART OUT- 4.0, 5 speed, locked one tons w/ 5.13s

rajincajingt

Well-Known Member
Joined
Feb 2, 2009
Messages
176
i have a project i just picked up - i will have pictures up after the weekend.
title in hand

part out list included below

92YJ - body is rough and 2 tone (not the good kind)

4.0HO miles TBA stock
AX15 stock
231 with AA SYE

HP60 front 5.13s spool pass side high steer arm stock shafts. 1350 yoke. outters need rebuilt and no brakes. brake hardware is probably 90% complete.

FF14b rear. 5.13s gov lock ballistic shave kit with wire edm clearanced gears. tube truss 1350 yoke 05 2500 dodge brakes, calipers and huge rotors.

front is set up for leafs, stretched as far as i can go with the stock box. hydro assist were in the plans and i have a new box and ram to go with. Also has a huge high steer arm on pass side. Tie rod included but one heim needs to be replaced.



rear is half set up for 4 link. uppers are not done. no shock mounts

gas tank is in the bed.
Aftermarket sliders and rear bumper
Family style rear cage
Seats are rough

5 h1 wheels with mag inserts. studs look good, might need new o-rings i might have new orings
4 h2 wheels with really low tread 37" blue label krawlers. 20 to 50%

i will have this whole package on a trailer for delivery. you will not have to load. you can also borrow the trailer for a short period of time to unload at your convenience. you can also purchase said trailer with the jeep if you like. parting out might be an option, but if so, you will get my clapped out d70 rear with spool instead of this nice, pretty and new 14b.

singed title in hand. the title holder (not me) will sign the jeep directly over to you upon purchase.

$4,000 cash sale

i am also open to all kinds of trades and i have some cash for the right deal. i would really like a pop up or slide in - 4x4s, side by sides, golf carts, boats, guns, beer, goose neck trailers, etc etc.

i can also deliver up to 500 miles for the price of diesel. also negotiable.

reply here or to rajincajintj at gmail

located in new orleans la
 
Re: YJ project - 4.0, 5 speed, locked one tons w/ 5.13s

a6f9c586-2f63-1be9.jpg


a6f9c586-2f76-7a73.jpg


a6f9c586-2f82-ebd5.jpg
 
Re: YJ project - 4.0, 5 speed, locked one tons w/ 5.13s

first post has been edited to reflect the actual parts available.

this thing is on a trailer and ready to go.

trades are welcome, just get this thing gone.
 
Re: YJ project - 4.0, 5 speed, locked one tons w/ 5.13s

as she sits right now, on the trailer ready to roll
964dd93a.jpg


assorted leafs and links. YJ and XJ packs with f150 main leafs added and BTF Shackles. upper links for the rear, bushings on one side, 7/8" chomo heims on the other. mock up links, og 60 tie rod. high lift not included, that is mine.
64d47cb9.jpg


krawler 1
2a11bf96.jpg


krawler 2 worst tread
3a5dd2fe.jpg


krawler 3 best tread and brake set up on the 14b
917d8d0a.jpg

1b4a234b.jpg



krawler 4
a3173a06.jpg

a22a8501.jpg


14b with tires. this has a gov lock, wire EDM gears and a Ballistic fab cover and shave kit. no miles and full of oil
e62d011a.jpg


hp 60
966401cb.jpg
 
Re: YJ project - 4.0, 5 speed, locked one tons w/ 5.13s

Last bump before the part out
 
Re: YJ project - 4.0, 5 speed, locked one tons w/ 5.13s

YJ body - 800
includes -family style roll cage-gas tank in bed-two seats-dash-windshild-hood-fenders-grill-blinkers-headlights-radiator-shroud-wiring-steering box-colum-brake booster-master cylinder-wheel
sliders searchers 100-
rear bumper searchers 100-
4.0l stock 120k 400
ax15 stock 120k 100
np231 sye 300
H1s 8 bolt mag inserts with hardware, new orings, studs, nuts 600
37" krawlers and H2s 30-50% 800
coilovers 700
2.5x16", billet hardware, 4 resi holders, 300 and 175 new blue coils, reservoirs billet hardware, (2) 18" 300lb 3" blue coils
(2) 12" 175lb 3" blue coils
4 aluminum resi clamps
YJ leafs added 150 main leaf pair-100
XJ Leafs added main leaf pair-150
YJ 4" lift springs pair - 200
shock hoops 1.5"x18" 50
HP60 5.13, spool, new bearings, stock cover, stocks shafts, tie rod, one high steer arm 1500
Superduty 60 4.10s complete 700
XXX Fabrication superduty 4 link mounts 250
sterling 10.5 4.10s complete 200
superduty rollers stock chrome with caps and lugnuts 200
i also have a sm465 and clocked flat 205 - 500
 
Top