ColbyJohnson419
Well-Known Member
Posting this up here for my buddy Richard. I know some of you know this rig, its been wheeled at choccolocco and morris mountain a few times, wishing it was a buggy
Here are the specs:
5.29 gears in the diffs
Corbeau Susp. seats with simpson 5pt harness
Yukon chromoly grizzly locker front
Detroit locker rear
Chromoly dirty thirty axle shafts front
Stock shafts rear
WARN hubs
Double transfer case 2.28 front 4.7 rear
Custom drive shafts front and rear
FJ80 high pinion third member front
Refurbished the stock 22R
GM alternator with adapter bracket
FJ80 master cylinder
Steel braided bake lines
GM rear discs and calipers with adapter rear
New stock front calipers and rotors
17" black steel wheels
37" 12.50 BFG KM2's
Marlin crawler bumper
Trail gear lift, springs shackles shock hoops high steer etc...
Fox emulsion shox 14"
Custom inner roll cage and flat bed
Smittybilt 8000lb winch
I LOVE this rig, ive messed around in it a time or two, its AWESOME! Its been flopped one time, resulting in exterior damage but truck runs really good regardless.
Here are some pictures after the flop, and the current condition of the rig.
Heres some of the flop laughing1
Richard is wanting 8,000 OBO, please do not hesitate to ask questions, please no low balling. This is a great rig, it needs to go to a good home and someone who will put it through the ringer. This rig is not beat, everything works perfect, I dont even think its been wheeled hard enough, or long enough to wear out any parts. If you are serious, please PM me and I will give you my buddies phone number. Thank you
Here are the specs:
5.29 gears in the diffs
Corbeau Susp. seats with simpson 5pt harness
Yukon chromoly grizzly locker front
Detroit locker rear
Chromoly dirty thirty axle shafts front
Stock shafts rear
WARN hubs
Double transfer case 2.28 front 4.7 rear
Custom drive shafts front and rear
FJ80 high pinion third member front
Refurbished the stock 22R
GM alternator with adapter bracket
FJ80 master cylinder
Steel braided bake lines
GM rear discs and calipers with adapter rear
New stock front calipers and rotors
17" black steel wheels
37" 12.50 BFG KM2's
Marlin crawler bumper
Trail gear lift, springs shackles shock hoops high steer etc...
Fox emulsion shox 14"
Custom inner roll cage and flat bed
Smittybilt 8000lb winch
I LOVE this rig, ive messed around in it a time or two, its AWESOME! Its been flopped one time, resulting in exterior damage but truck runs really good regardless.
Here are some pictures after the flop, and the current condition of the rig.
Heres some of the flop laughing1
Richard is wanting 8,000 OBO, please do not hesitate to ask questions, please no low balling. This is a great rig, it needs to go to a good home and someone who will put it through the ringer. This rig is not beat, everything works perfect, I dont even think its been wheeled hard enough, or long enough to wear out any parts. If you are serious, please PM me and I will give you my buddies phone number. Thank you