94Blazer327
Slow ass cab truck
CUCV 1 tons both are 4.56
D60
Lock rite locker- I've never had an issue with it and I've beat on it plenty
Ballistic Hi steer arms
8" ram that I've limited internally for the Hi steer
Crane cover
Newish kingpins, lower bearings and wheel bearings
Hubs are drilled with grease zerts so you can add grease w/o tearing down
Tie rod with 3/4 hiems
35 spline spicer stub shafts with spicer slugs
1350 yoke u bolt style
Set up for 3 link
Calipers ground for 15" wheels
Lug nuts included
14 bolt
Detroit locker
Solid cover
Cover matched
Disk brakes with ballistic weld on brackets
Set up for leafs, with traction bar and lug nuts included
1350 u bolt style yoke
I've got to pull them still but I can do that pretty quick
Sure they need to be brushed and painted but they are good axles. I've ran them for ten years and haven't had too many issues with them.
$1800 obo
Call or text 256-426-3463 located in Priceville AL
D60
Lock rite locker- I've never had an issue with it and I've beat on it plenty
Ballistic Hi steer arms
8" ram that I've limited internally for the Hi steer
Crane cover
Newish kingpins, lower bearings and wheel bearings
Hubs are drilled with grease zerts so you can add grease w/o tearing down
Tie rod with 3/4 hiems
35 spline spicer stub shafts with spicer slugs
1350 yoke u bolt style
Set up for 3 link
Calipers ground for 15" wheels
Lug nuts included
14 bolt
Detroit locker
Solid cover
Cover matched
Disk brakes with ballistic weld on brackets
Set up for leafs, with traction bar and lug nuts included
1350 u bolt style yoke
I've got to pull them still but I can do that pretty quick
Sure they need to be brushed and painted but they are good axles. I've ran them for ten years and haven't had too many issues with them.
$1800 obo
Call or text 256-426-3463 located in Priceville AL
