smbroady82
Well-Known Member
Putting the samurai up for sale.
$18,000 SOLD
One of (if not) the best crawling rigs I've ever been in/owned/driven.
Shacklett built 385ci smallblock chevy
12.1 compression
Dart iron heads
Scat crank
Dome pistons
5.7 rods
Propane
Very strong motor
Th350 automatic
1800? stall
Full manual valve body
B&M shifter (shifts very smoothly)
Atlas II 3.0 Race case ($3200+)
Suspension:
4 linked front & rear
Aluminum links
Mix of 7/8 & 3/4 Heims (all but 2 or 4 are 7/8)
Fox coilovers
PAC racing springs
Fox bump stops & cans front
Limit straps front and rear
Axles:
Chevy kingpin 60 front
5.13s
Detroit
Yukon 35spline shafts and joints
Solid keyed knuckles
Solid HS arms
Drive flanges (I think Yukon)
Ballistic diff cover
Disk brakes
Brand new 1/4" thick truss from Justin @reject fab
14b rear
Stock shafts
5.13s full locker
Disk brakes
Brand new Barnes 3/8" 13b shave cover
Pinion guard
Wheels/ Tires:
17" Racelines 8x6.5
39" BFG red label Krawlers 75%+
Don't leak down
I have a full spare on an Allied steel Beadlock that can be purchased for an additional $500.
Interior:
Corbeau Baja Ss seats (vinyl)
Prp padded 5 point harnesses
Steering wheel disconnect
13" steering wheel
Ignition , aux fans (radiator & trans cooler), light bar, rock lights all on switches
Battery disconnect switch
Misc:
Optima yellow top battery
MSD ignition
MSD distributor
KRC power steering reservoir
Full hydro steering
Warn comp. 9.0rc ($1600+ new)
Synthetic winch rope
Brand new Derale 650cfm cooler/fan combo (for trans)
Brand new Boss 27" sound bar (not wired in yet)(just paid $350+ for)
Brand new fire extinguisher
Soft top
WB is right around 113"
** trans to atlas adapter is leaking from a small crack
I rode all of a 3 day weekend with no issues , made sure everything was good and tight.
***I have a brand new unopened AA 350 to atlas adapter that will come with the sale. If I keep it ,I planned on clocking the case up which would require some light modifications. I'll leave that decision up to the new owner if sold.
May entertain trades, but I'm picky. No rzrs under 1000xp , and they'll need to come with a fair amount of boot my way (just being up front). Will look at other crawlers (prefer tons/ auto) but mainly wanting a cash deal.
May trade up (wife likes smith and angryfab buggies) ???????????
Located in Gurley, AL
256-65eight-7122
Text preferred first, I work swing shift
Thanks
Sent from my iPhone using Tapatalk
One of (if not) the best crawling rigs I've ever been in/owned/driven.
Shacklett built 385ci smallblock chevy
12.1 compression
Dart iron heads
Scat crank
Dome pistons
5.7 rods
Propane
Very strong motor
Th350 automatic
1800? stall
Full manual valve body
B&M shifter (shifts very smoothly)
Atlas II 3.0 Race case ($3200+)
Suspension:
4 linked front & rear
Aluminum links
Mix of 7/8 & 3/4 Heims (all but 2 or 4 are 7/8)
Fox coilovers
PAC racing springs
Fox bump stops & cans front
Limit straps front and rear
Axles:
Chevy kingpin 60 front
5.13s
Detroit
Yukon 35spline shafts and joints
Solid keyed knuckles
Solid HS arms
Drive flanges (I think Yukon)
Ballistic diff cover
Disk brakes
Brand new 1/4" thick truss from Justin @reject fab
14b rear
Stock shafts
5.13s full locker
Disk brakes
Brand new Barnes 3/8" 13b shave cover
Pinion guard
Wheels/ Tires:
17" Racelines 8x6.5
39" BFG red label Krawlers 75%+
Don't leak down
I have a full spare on an Allied steel Beadlock that can be purchased for an additional $500.
Interior:
Corbeau Baja Ss seats (vinyl)
Prp padded 5 point harnesses
Steering wheel disconnect
13" steering wheel
Ignition , aux fans (radiator & trans cooler), light bar, rock lights all on switches
Battery disconnect switch
Misc:
Optima yellow top battery
MSD ignition
MSD distributor
KRC power steering reservoir
Full hydro steering
Warn comp. 9.0rc ($1600+ new)
Synthetic winch rope
Brand new Derale 650cfm cooler/fan combo (for trans)
Brand new Boss 27" sound bar (not wired in yet)(just paid $350+ for)
Brand new fire extinguisher
Soft top
WB is right around 113"
** trans to atlas adapter is leaking from a small crack
I rode all of a 3 day weekend with no issues , made sure everything was good and tight.
***I have a brand new unopened AA 350 to atlas adapter that will come with the sale. If I keep it ,I planned on clocking the case up which would require some light modifications. I'll leave that decision up to the new owner if sold.
May entertain trades, but I'm picky. No rzrs under 1000xp , and they'll need to come with a fair amount of boot my way (just being up front). Will look at other crawlers (prefer tons/ auto) but mainly wanting a cash deal.
May trade up (wife likes smith and angryfab buggies) ???????????
Located in Gurley, AL
256-65eight-7122
Text preferred first, I work swing shift
Thanks
Sent from my iPhone using Tapatalk
![IMG_3105[1].JPG](http://attachments.www.hardlinecrawlers.com/xfmg/thumbnail/4/4661-63f0d830f7f19ce16ac57183878423f3.jpg?1625928471)
