This is my atempt at a '85 Yota Truggy Build, the whole project has been done on a budget with the help of some friends and fueled by cold beer and thinking. Alot of the **** just happened to fall into place, the best advise I got on the whole thing came from SMEWHTGUY the weekend before I started started the back half. While teaching me how to bend and notch tube he simply said. "you can think and plan but sometimes you just gotta through some sticks of tube up, step back and decide if you like it or if it will work." the whole build went that way.
Started out life as a pretty typical 85 on 35's
305 SBC
TH350
NP205
Bed bobbed 14"
Welded rear
detroit in the front
rear springs up front and Chevy leafs in the rear
Played the usual games with stock shafts so some longfields got ordered.
And got the cab gutted to put the cage in. 1.75" DOM going through the dash.
Got the GF to help out with the cleaning...
Started out life as a pretty typical 85 on 35's
305 SBC
TH350
NP205
Bed bobbed 14"
Welded rear
detroit in the front
rear springs up front and Chevy leafs in the rear
Played the usual games with stock shafts so some longfields got ordered.
And got the cab gutted to put the cage in. 1.75" DOM going through the dash.
Got the GF to help out with the cleaning...