417chevy
Well-Known Member
I feel you missed the part I said I'm buying 5 tonsbjeep said:No not with 5 ton axles it will not take 6k.
But it is his. I think it will be fun to watch it.
Sent from my iPhone using Tapatalk
I feel you missed the part I said I'm buying 5 tonsbjeep said:No not with 5 ton axles it will not take 6k.
But it is his. I think it will be fun to watch it.
Yep I willJohnG said:Sell everything, buy a running finished rig. You will never finish this.
Sent using left thumb.
417chevy said:Thanks and I'm probably gona use the same links might change the uppers not sure just yet I have 1.25 heims so those will be fine I'm thinkin I'll just get limiting straps and cut me an inch short of my air shocks so I will never have any of that big axle hangin on the shocks
To clarify I am not building a bouncer I'm gona run the rockwells stock I don't think I'll have any problems if it's that big of a problem with the big block I can always throw the 383 in there and still have plenty of power
Sent from my iPhone using Tapatalk
Sweet thanks for the infomuddinmetal said:2 inch shorter quad wraps at a minimum
Chains are cheaper and don't stretch!417chevy said:Sweet thanks for the info
Sent from my iPhone using Tapatalk
bjeep said:6K will not even pay for the axles to hold big horsepower.
Much less the rest of the project. :****:
Be realistic about it.
Neal3000 said:5 ton axles won't hold up to a F'ing bigblock? WTF
417chevy said:Thanks and I'm probably gona use the same links might change the uppers not sure just yet I have 1.25 heims so those will be fine I'm thinkin I'll just get limiting straps and cut me an inch short of my air shocks so I will never have any of that big axle hangin on the shocks
To clarify I am not building a bouncer I'm gona run the rockwells stock I don't think I'll have any problems if it's that big of a problem with the big block I can always throw the 383 in there and still have plenty of power
Sent from my iPhone using Tapatalk
Lowers are 2x.250 uppers are 1.75x.250TacomaJD said:What are the specs on those link bars then, that's what I asked. They look tiny for your projected dumptruck style setup! You can have 1.25 heims all day long, but that don't stop tubing from bending, link mounts from ripping off, or worse. With a big block chassis and them big honkin' heavy ass axles, there will be a lot of force depending on those link bars from both ends!
We about Woopow and building **** round these parts not punctuationRokcrler said:
Reading some of these posts is difficult as ****!
417chevy said:Lowers are 2x.250 uppers are 1.75x.250
Sent from my iPhone using Tapatalk
TacomaJD said:Damn, must be the way the pics are, they don't look like 2" tubing! That should hold up alright long as it's DOM!
His plans are a big block bad ass crawler with 5tons ! He can run whatever tire fits his fancy and ride wherever he wants!rednecklights said:Awesome !
So, it appears you have a bunch already thought out...
Would you mind listing a somewhat overview of your plans ?
JohnG said:Sell everything, buy a running finished rig. You will never finish this.
Sent using left thumb.
What size tire do you run?kushKrawlin said: