fl-krawler
Well-Known Member
- Joined
- Aug 27, 2009
- Messages
- 525
Finally got a little time to start a build thread for my new buggy build, since I sold the last one before it was finished. The only parts being carried over from the old build are the 47" LTB's and the wheels they are mounted on. I have bounced back and forth on what axles I plan to run quite a bit lately. Anyways onto the build. To make packaging a little easier, I decided to make the chassis midrail one solid tube front to back. This will allow me to plumb it as an on-board air tank, that if my math is correct, should hold 16 gallons of air
Once the two main rails were done, I added in the tubes for the rear trunk area
Engine is a L92 out of an 09 silverado, backed by a 6L80 trans. CNC ported heads, TSP VVT-2 cam and a 416 rotating assembly will find its way to it when the build is done
I also have a supercharger off a ZL-1 camaro to help bump the power numbers
More pics to come as the build continues
Once the two main rails were done, I added in the tubes for the rear trunk area
Engine is a L92 out of an 09 silverado, backed by a 6L80 trans. CNC ported heads, TSP VVT-2 cam and a 416 rotating assembly will find its way to it when the build is done
I also have a supercharger off a ZL-1 camaro to help bump the power numbers
More pics to come as the build continues