fl-krawler
Well-Known Member
- Joined
- Aug 27, 2009
- Messages
- 525
Finally got a little time to start a build thread for my new buggy build, since I sold the last one before it was finished. The only parts being carried over from the old build are the 47" LTB's and the wheels they are mounted on. I have bounced back and forth on what axles I plan to run quite a bit lately. Anyways onto the build. To make packaging a little easier, I decided to make the chassis midrail one solid tube front to back. This will allow me to plumb it as an on-board air tank, that if my math is correct, should hold 16 gallons of air
![](http://i29.photobucket.com/albums/c254/fl-krawler/Facebook/Low%20rider%20buggy/10712398_983597425000216_4115897307611429413_o_zpshd1e3ozc.jpg)
Once the two main rails were done, I added in the tubes for the rear trunk area
![](http://i29.photobucket.com/albums/c254/fl-krawler/Facebook/Low%20rider%20buggy/1921084_989108397782452_6635550237227014487_o_zpsydtdqf2x.jpg)
![](http://i29.photobucket.com/albums/c254/fl-krawler/Facebook/Low%20rider%20buggy/1795318_989108464449112_8310277629459872937_o_zpsereucrfb.jpg)
![](http://i29.photobucket.com/albums/c254/fl-krawler/Facebook/Low%20rider%20buggy/10658566_989108547782437_1662835889001290577_o_zpsbzlzvp1o.jpg)
![](http://i29.photobucket.com/albums/c254/fl-krawler/Facebook/Low%20rider%20buggy/10658593_989108614449097_218725297189680740_o_zpstix8wkrd.jpg)
Engine is a L92 out of an 09 silverado, backed by a 6L80 trans. CNC ported heads, TSP VVT-2 cam and a 416 rotating assembly will find its way to it when the build is done
![](http://i29.photobucket.com/albums/c254/fl-krawler/Facebook/Low%20rider%20buggy/1598771_983597821666843_1739917228985828159_o_zpstdig4gfm.jpg)
I also have a supercharger off a ZL-1 camaro to help bump the power numbers
![](http://i29.photobucket.com/albums/c254/fl-krawler/Facebook/Low%20rider%20buggy/10511616_983597961666829_6316393164444781151_o_zpszbletiyg.jpg)
More pics to come as the build continues
![](http://i29.photobucket.com/albums/c254/fl-krawler/Facebook/Low%20rider%20buggy/10712398_983597425000216_4115897307611429413_o_zpshd1e3ozc.jpg)
Once the two main rails were done, I added in the tubes for the rear trunk area
![](http://i29.photobucket.com/albums/c254/fl-krawler/Facebook/Low%20rider%20buggy/1921084_989108397782452_6635550237227014487_o_zpsydtdqf2x.jpg)
![](http://i29.photobucket.com/albums/c254/fl-krawler/Facebook/Low%20rider%20buggy/1795318_989108464449112_8310277629459872937_o_zpsereucrfb.jpg)
![](http://i29.photobucket.com/albums/c254/fl-krawler/Facebook/Low%20rider%20buggy/10658566_989108547782437_1662835889001290577_o_zpsbzlzvp1o.jpg)
![](http://i29.photobucket.com/albums/c254/fl-krawler/Facebook/Low%20rider%20buggy/10658593_989108614449097_218725297189680740_o_zpstix8wkrd.jpg)
Engine is a L92 out of an 09 silverado, backed by a 6L80 trans. CNC ported heads, TSP VVT-2 cam and a 416 rotating assembly will find its way to it when the build is done
![](http://i29.photobucket.com/albums/c254/fl-krawler/Facebook/Low%20rider%20buggy/1598771_983597821666843_1739917228985828159_o_zpstdig4gfm.jpg)
I also have a supercharger off a ZL-1 camaro to help bump the power numbers
![](http://i29.photobucket.com/albums/c254/fl-krawler/Facebook/Low%20rider%20buggy/10511616_983597961666829_6316393164444781151_o_zpszbletiyg.jpg)
More pics to come as the build continues