yota38strong
Well-Known Member
Built sbc 355 around 450 hp
Fi Tech fuel injection
Rear mounted aluminum radiator
Electric water pump
Aluminum fuel cell
Th350 just built last week with all tci internals with tci reverse manual valve body w/ engine brake, 3500 stall converter
203/205 doubler with nwf doubler adapter, 32 spline input and output shafts, advanced adapters 1350 yokes
Front is Dana drw 60, with 5.91 r&p, spool, Yukon chromolly axles with Yukon super joints and Yukon hubs, full PSC hydro steering with dual ended ram and high steer arms, long spline front drive shaft
Rear is Dana 70 with 5.91 r&p welded carrier, disk brakes.
All 1350 driveline.
42" tsl's
Has 63" springs in the rear and 5" trail gear front springs.
Full exo cage
New 8000lb winch
Corbeau seats with 4 point harness tied to cage.
I have receipts for everything I've bought new in the last 3 months which are
Fi Tech fuel injection and all Fi Tech fuel lines,filters, and pump. I still have all the original paper work and box
Dual case adapter from nwf
Torque converter
Yokes
Fuel cell
The Fi Tech needs fine tuning. It has a base tune in it now and is self learning but with the engine setup it will need to be fine tuned.
$8500
Located in Moody, Alabama
2055162461
Fi Tech fuel injection
Rear mounted aluminum radiator
Electric water pump
Aluminum fuel cell
Th350 just built last week with all tci internals with tci reverse manual valve body w/ engine brake, 3500 stall converter
203/205 doubler with nwf doubler adapter, 32 spline input and output shafts, advanced adapters 1350 yokes
Front is Dana drw 60, with 5.91 r&p, spool, Yukon chromolly axles with Yukon super joints and Yukon hubs, full PSC hydro steering with dual ended ram and high steer arms, long spline front drive shaft
Rear is Dana 70 with 5.91 r&p welded carrier, disk brakes.
All 1350 driveline.
42" tsl's
Has 63" springs in the rear and 5" trail gear front springs.
Full exo cage
New 8000lb winch
Corbeau seats with 4 point harness tied to cage.
I have receipts for everything I've bought new in the last 3 months which are
Fi Tech fuel injection and all Fi Tech fuel lines,filters, and pump. I still have all the original paper work and box
Dual case adapter from nwf
Torque converter
Yokes
Fuel cell
The Fi Tech needs fine tuning. It has a base tune in it now and is self learning but with the engine setup it will need to be fine tuned.
$8500
Located in Moody, Alabama
2055162461