wayne86
Well-Known Member
With the Dana 300 in there I have very little clearance from the side of the th400 with 1310 yokes and a 2.25" driveshaft.. I was afraid at full droop on passenger side the one piece driveshaft might swing over and get into it. I will find out soon how much clearance I have after the Atlas is bolted up. My front driveshaft will be damn near 4 ft long though I think, if I go one piece. If I have problems I'll let you all know.canepari said:My junk has a 4.3, th350, 203-205 doubler and I have plenty of room for 2.25" one piece front shaft. I used a 77 Dodge 60, cheated the front 1/2" to the right and I've got plenty of room.