warpaintfab#1
Well-Known Member
- Joined
- Nov 30, 2010
- Messages
- 267
I've had this buggy for a few years now and I'm just wanting to start a new project. I do not need to sell buggy, just wanted to throw it out there and see if there was any interest. Buggy is super reliable and a blast to drive. It truly is the best of both worlds, you can point and shoot it as well as crawl anything that you need to. The buggy has a ton of new parts as i just went through it last month.
Specs:
-Smith Motorsports chassis- 1 3/4 .120 wall DOM
-Built 6.0 with ported and polished 5.3 heads, comp cam and valve springs (2 rides on it)
-Jims performance harness and computer
-Custom Jimmy Smith Headers with Black Ceramic Coat
-Built Th350 Kevlar clutches and shift kit (2 rides on it)
-NP205 with Wideopen design clocking adapter
-New driveshafts from Carolina Driveline, 1410 joints(2 rides)
-Front Sway-away 2x16 remote resivor coilovers with tender coils
-Rear Sway-away 2x16 emulsion coilovers with tender coils
-Front also has 2x4 sway-away air bumps
-Front and rear axles have pinion brake and a detriots
-Rear axle has new joints and ouverson violator shafts
-2 TC PSC steering pumps,resivor, and cooler with a double ended ram in the front and a single ended ram in the rear with PSC Pilot valve.
-New kirkey seats and covers
-ATL fuel cell
- New griffin radiator and fan
-Warn 9k winch with mastercraft rope
- New autometer gauges
-Momo steering wheel
-Modified B&M shifter
-12 Volt Guy switch panel
-optima battery
-44" Tsls 90% tread on 15x10 MRW beadlocks.
I'm sure that I have left a bunch of stuff out but that should cover most of it. Again I love this buggy and it has never let me down no matter what I have done! Buggy as I no of needs nothing just took it riding last weekend and it never ran hotter than 180 degrees and preformed flawlessly. I will be posting pics asap but feel free to give me a call with any questions 828-508-0979. $24,000
Specs:
-Smith Motorsports chassis- 1 3/4 .120 wall DOM
-Built 6.0 with ported and polished 5.3 heads, comp cam and valve springs (2 rides on it)
-Jims performance harness and computer
-Custom Jimmy Smith Headers with Black Ceramic Coat
-Built Th350 Kevlar clutches and shift kit (2 rides on it)
-NP205 with Wideopen design clocking adapter
-New driveshafts from Carolina Driveline, 1410 joints(2 rides)
-Front Sway-away 2x16 remote resivor coilovers with tender coils
-Rear Sway-away 2x16 emulsion coilovers with tender coils
-Front also has 2x4 sway-away air bumps
-Front and rear axles have pinion brake and a detriots
-Rear axle has new joints and ouverson violator shafts
-2 TC PSC steering pumps,resivor, and cooler with a double ended ram in the front and a single ended ram in the rear with PSC Pilot valve.
-New kirkey seats and covers
-ATL fuel cell
- New griffin radiator and fan
-Warn 9k winch with mastercraft rope
- New autometer gauges
-Momo steering wheel
-Modified B&M shifter
-12 Volt Guy switch panel
-optima battery
-44" Tsls 90% tread on 15x10 MRW beadlocks.
I'm sure that I have left a bunch of stuff out but that should cover most of it. Again I love this buggy and it has never let me down no matter what I have done! Buggy as I no of needs nothing just took it riding last weekend and it never ran hotter than 180 degrees and preformed flawlessly. I will be posting pics asap but feel free to give me a call with any questions 828-508-0979. $24,000
