• Help Support Hardline Crawlers :

New profile posts

i hear your the man with all the answers so a bit of your time and knowledge would be appreciated. I'm running 16" coil overs and am thinking of switching to 18" ORI. Primarily for lean on hills and huge waterfalls. 123" wheel base & 3K lbs roughly.

Attachments

  • IMG_7892.jpeg
    IMG_7892.jpeg
    315.7 KB · Views: 3
A
alscott
Got accepted to the FB group. Looks like mainly street jeep stuff for the most part. Youre welcome to join my group on FB also if you want. Windrock Buggy Riders, dedicated buggy page and ignorance mainly. I host multiple rides a years called the terrible rides. This year I am hosting them at harlan and aop, a 24 hour ride at windrock, and a competition at windrock.
Trailabite
Trailabite
I miss-understood your original post lol, I thought you were looking for a group to ride with. Our FB page is mostly street stuff. In our club forum there is about a dozen or so of us that have buggy or buggy type jeeps (v8's on 42's) that try to get out once a month. I will check out your page though. I could be interested in a ride at AOP, since it's only 2 hours from me lol.
Do you know anyone who is racing a TJ in 4600 class? I have some question and do not know who to ask.
Sorry I cut the ride short. My dam boots got filled up with water running down my pants and I was miserable.
Dirt700
Dirt700
Not going to lie, I was glad you headed back, I was soaked
I'm just south of Indianapolis area. Can text if you want 317-619-3383. Where y'all located

Attachments

  • 0EE2D308-AB37-493F-9CE2-F2594C1F7222.jpeg
    0EE2D308-AB37-493F-9CE2-F2594C1F7222.jpeg
    346.5 KB · Views: 14
  • 6C8D7C90-E884-4C0D-BC54-0D6ADAF3EE7B.jpeg
    6C8D7C90-E884-4C0D-BC54-0D6ADAF3EE7B.jpeg
    343.4 KB · Views: 12
  • 8E1CE378-236B-400E-A219-F483CA4E3BFB.jpeg
    8E1CE378-236B-400E-A219-F483CA4E3BFB.jpeg
    427.8 KB · Views: 14
  • F202A862-CCBF-4106-8B87-E9363BA48B46.jpeg
    F202A862-CCBF-4106-8B87-E9363BA48B46.jpeg
    129.1 KB · Views: 15
  • D39EEC91-64D2-413C-B75A-F2EA9F17E939.jpeg
    D39EEC91-64D2-413C-B75A-F2EA9F17E939.jpeg
    489.1 KB · Views: 16
You still hav
e the buggy up for sale ?
M
M
marktortorice
5.3l cer coated headers all stainless exh 400 trans alum racing rad alum fuel cell corbeau seats atlas 4.3 gear reduction polished 4 wheel disc1350 joints, 20 an fittings ,14 bolt rear axle, dana 60 fr axle, chrome moly axles, detroit lockers , super joints, 513 gears, pse steering fr and rear led lights, lexan windshield chopped top custom fabrication jl audio lighting full body A rare find show quality crawler.
Bunch of us are going to AOP 5/14-5/16. Mike Ipock is one of us going. Several folks wheel from around the Trafalgar area.
T
TravisXJ
I'd like to make it but not sure I'll have a way to get the Jeep down there. Have see what I can come up with
kkoepper
kkoepper
That sounds good. I don't know if anybody has room for another rig on their trailer or not.
Are you still looking for samurai parts? I have everything and more. My number is 502 600 1745
whiskeymakin
whiskeymakin
Shoot some prices on each....motors run? Efi?
poolman
poolman
Yes runs. Carb, I'd like to get rid of it all together
poolman
poolman
You have a rough number on a cage? I'll just get it done and worry about selling it later. Unless you wanted it as a partial trade
Do you live there on pearl street next to my dad? Mike bishop, had my can and maverick on my red utility trailer outside there for a year a while back.
I'd like the cooler and Shoulder straps.
Can you ballpark shipping to 30005?
Dirt700
Dirt700
I got it, as soon as I get a tracking number, I will send it to you
Truckin222
Truckin222
Thanks man.
Dirt700
Dirt700
It's shipped yesterday, they were supposed to email her the tracking. It should arrive Tuesday by lunch
Sorry, I don't understand this site PM...

Your Dana 70:
I should have asked.
Is it full float?
Do you know brand and/or condition of gears?
Any spring perches or link brackets welded to it?
Can you send me a pic or 2
678-296-8891 if you want to text pics or call/text

Thanks,
Zach
s10me
s10me
Its out of a mid 80s e350 van. I think they are yukon gears. It has perches welded on it
Truckin222
Truckin222
Is it 35 spline? Or 32?
WMS width?
Any chance you can read the BOM# on the tube or maybe the tag is still there?
I am really interested, Sorry for a million questions.
make me an offer. I have a spare set of axles and disc and calipers to convert them
Truckin222
Truckin222
I should have asked.
Is it full float?
Do you know brand and/or condition of gears?
Any spring perches or link brackets welded to it?
Can you send me a pic or 2
678-296-8891 if you want to text pics or call/text

Thanks,
Zach
s10me
s10me
Full float
Boa noite amigo, sou novo aqui no fórum, sou brasileiro e realmente admiro o trabalho de vocês americanos na construção dos buggies. Vi todo o trabalho que você postou no seu e achei fantástico, parabéns. Gostaria de saber como posso obter um plano de construção igual para o seu buggy, se possível? Porque eu pensei que o modelo era o melhor e gostaria de construir um modelo semelhante.

Latest posts

Top