untchabl
On the Rocks
Looking to sell my rear engine Honda transaxle buggy. I've owned it for about 2 years, I bought it from the guy that built it. It works very well and has been extremely reliable. Zero issues with the buggy, I'm just ready to try another rig and can't afford to keep this one and build or buy another.
1.6L DOHC ZC engine
Stock Honda auto trans
Modified wiring harness to eliminate unnecessary wires
105" wheelbase
2,940 pounds ready to ride (front tires are filled to the hubs with water)
Front axle
- stock Toyota axle housing that has been trussed
- High pinion 3rd
- 5.29's
- Spool (spool & install kit have 3 rides on them, reused the gears)
- 30-spline RCV axles & drive flanges
- Hub stud eliminator mod
- ARP knuckle studs
- Trail Gear trail safe wipers
Rear axle
- stock Toyota axle housing that has been cut & flipped and trussed
- new 5.29's (only 3 rides on gears, spool and install kit, 3rd was setup by East Coast Gear Supply)
- Spool
- 30-spline Longfield axles & drive flanges (real Longs, not Trail Gear)
- ARP knuckle studs
- Trail Gear trail safe wipers
Full PSC hydro steering. Double ended ram on front and single ended ram on rear.
Suspension
- 3 link front & rear
- all links, pan hard bars and rear tie rod are aluminum
- Johnny joints on upper & lower links
- Heims on pan hard bars and steering
- 14" 2.0 air shocks on all 4 corners
- Anti-sway bar on rear
4 - 37" Maxxis Trepador stickies on Trail Gear Creeper Locks. 1 - 37" Trepador sticky mounted on a steel wheel for a spare.
Twisted Stitch seats with 5-pt harnesses
Warn 9.0RC winch (can suck down front suspension)
small stereo setup (amp mounted behind gauges with iPod hookup)
Autometer gauges
Vision X lights on front & overhead dome light
I'm sure I left out a lot of details. Feel free to ask any questions.
SOLD!
Located in Central NC. Will help deliver within 300-400 miles.
1.6L DOHC ZC engine
Stock Honda auto trans
Modified wiring harness to eliminate unnecessary wires
105" wheelbase
2,940 pounds ready to ride (front tires are filled to the hubs with water)
Front axle
- stock Toyota axle housing that has been trussed
- High pinion 3rd
- 5.29's
- Spool (spool & install kit have 3 rides on them, reused the gears)
- 30-spline RCV axles & drive flanges
- Hub stud eliminator mod
- ARP knuckle studs
- Trail Gear trail safe wipers
Rear axle
- stock Toyota axle housing that has been cut & flipped and trussed
- new 5.29's (only 3 rides on gears, spool and install kit, 3rd was setup by East Coast Gear Supply)
- Spool
- 30-spline Longfield axles & drive flanges (real Longs, not Trail Gear)
- ARP knuckle studs
- Trail Gear trail safe wipers
Full PSC hydro steering. Double ended ram on front and single ended ram on rear.
Suspension
- 3 link front & rear
- all links, pan hard bars and rear tie rod are aluminum
- Johnny joints on upper & lower links
- Heims on pan hard bars and steering
- 14" 2.0 air shocks on all 4 corners
- Anti-sway bar on rear
4 - 37" Maxxis Trepador stickies on Trail Gear Creeper Locks. 1 - 37" Trepador sticky mounted on a steel wheel for a spare.
Twisted Stitch seats with 5-pt harnesses
Warn 9.0RC winch (can suck down front suspension)
small stereo setup (amp mounted behind gauges with iPod hookup)
Autometer gauges
Vision X lights on front & overhead dome light
I'm sure I left out a lot of details. Feel free to ask any questions.
SOLD!
Located in Central NC. Will help deliver within 300-400 miles.