• Help Support Hardline Crawlers :

Sold/Expired Shop clean out. Buy this stuff or it is in the trash. Price drop on seat

IRONMIKE

O.D.
Joined
Dec 9, 2011
Messages
388
Location
Lexington, Ky
Items are all located in Lexington KY. Glad to ship on your dime. I do accept Paypal, you cover service fee or send as gift. P.M. for questions and I will try to answer the best I can. Please see the pics. If they don't load, I will text them to ya.

Items going to the scrap pile:
Orbital Valve mount. This came to me in a bulk purchase. It is intended to mount an orbital valve in place of a steering box. Comes with U joint to addapt to steering shaft. Asking $10.00 SOLD
PSC resivour. This is for a hydra boost set up. Has 2 returns. Asking $25.00 SOLD
D60 inner shaft. 35 spline. Long side. The fist pic is the axle next to my stock Chevy D60 axle. The second is the length from the center of the C to the end of the shaft. Asking $75.00 OBO SOLD
LS3 ignition wires. These will not work on a early model LS series engine. They are too damn short. Two sets in the box. Asking $10.00 SOLD
14B limited slip diff. This was a take out from the axle on my buggy. My axle builder says this unit can be rebuilt with new clutches and heavy spring kit and would act just like a locker. What ever! $50.00 OBO SOLD
LS1 intake. It was out of a Camaro. Not electronic throttle, requires a cable. Asking $125 OBO. SOLD
Walbro pickups and 2 fuel pumps. The box has inline fuel pumps and 2 walbro pickups in it. One walbro is has a small tear in the screen. Asking $75.00 OBO for the box. PENDING


Item not going to the scrap pile:
Samurai rear bench recovered to match Corbreau suspension seat. This thing would be perfect for a sxs back seat or a buggy. Price drop $225, was asking $300
 

Attachments

  • CAM02041.jpg
    CAM02041.jpg
    127.7 KB · Views: 165
  • CAM02041.jpg
    CAM02041.jpg
    127.7 KB · Views: 162
  • CAM02042.jpg
    CAM02042.jpg
    103 KB · Views: 163
  • CAM02044.jpg
    CAM02044.jpg
    136.2 KB · Views: 161
Re: Shop clean out. Buy this stuff or it is hitting the garbage.

More Pics
 

Attachments

  • CAM02812.jpg
    CAM02812.jpg
    126.9 KB · Views: 147
  • CAM02811.jpg
    CAM02811.jpg
    86.3 KB · Views: 153
  • CAM02808.jpg
    CAM02808.jpg
    85.9 KB · Views: 150
  • CAM02045.jpg
    CAM02045.jpg
    140.6 KB · Views: 157
Re: Shop clean out. Buy this stuff or it is hitting the garbage.

more pics 2
 

Attachments

  • CAM03595.jpg
    CAM03595.jpg
    147.2 KB · Views: 149
  • CAM03599.jpg
    CAM03599.jpg
    205.9 KB · Views: 161
  • CAM03393.jpg
    CAM03393.jpg
    105 KB · Views: 145
Re: Shop clean out. Buy this stuff or it is hitting the garbage.

Pics 3
 

Attachments

  • CAM03505.jpg
    CAM03505.jpg
    79.6 KB · Views: 143
  • CAM03504.jpg
    CAM03504.jpg
    112.3 KB · Views: 150
  • CAM03522.jpg
    CAM03522.jpg
    138.3 KB · Views: 147
  • CAM03521.jpg
    CAM03521.jpg
    121.9 KB · Views: 144
Re: Shop clean out. Buy this stuff or it is hitting the garbage.

I'll take the PSC reservoir, good guy to deal with here. I bought a transmission from you a couple years ago that is still going strong!! :dblthumb:



Edit, I just noticed it's pending. Let me know. thanks
 
Re: Shop clean out. Buy this stuff or it is hitting the garbage.

I'll take Reservoir If deal falls threw
 
Re: Shop clean out. Buy this stuff or it is hitting the garbage.

Mike, do you know what that 60 shaft is out of? According to the BOM list I have, that length of shaft shows as a left inner Dana 70 shaft for 1967-72 W200 & W300.
 
Re: Shop clean out. Buy this stuff or it is hitting the garbage.

B,
That shaft is brand new never installed alloy axle. I have to check the stampingon it. I believe it is for a Ford Dana 60 per the D60 bible. It has been a bit since I have messed with it. I will post some better pics tonight.
Thanks,
M
 
Re: Shop clean out. Buy this stuff or it is hitting the garbage.

D60 shaft info:
Pic 1 overall length
Pic 2 Shaft length to yoke
Pic 3 Shaft length to C/L of yoke joint hole
Pic 4 Seal diameter.
The yoke says 4340. No manufacture name on it.
 

Attachments

  • CAM04344.jpg
    CAM04344.jpg
    132.7 KB · Views: 124
  • CAM04341.jpg
    CAM04341.jpg
    115.5 KB · Views: 128
  • CAM04340.jpg
    CAM04340.jpg
    111.9 KB · Views: 120
  • CAM04339.jpg
    CAM04339.jpg
    118.2 KB · Views: 123
Re: Shop clean out. Buy this stuff or it is hitting the garbage.

Thursday bump. List updated. Most of it is gone. Price drop on Sami seat.
 
Re: Shop clean out. Buy this stuff or it is hitting the garbage. Items added.

Friday bump. Added an intake and some fuel pumps with walbro pickups.
 

Attachments

  • CAM04359[1].jpg
    CAM04359[1].jpg
    104 KB · Views: 119
  • CAM04359[1].jpg
    CAM04359[1].jpg
    104 KB · Views: 117
  • CAM04358[1].jpg
    CAM04358[1].jpg
    121 KB · Views: 120
  • CAM04360[1].jpg
    CAM04360[1].jpg
    118.2 KB · Views: 124
Re: Shop clean out. Buy this stuff or it is in the trash. Updated and items added.

What's the model# on the fuel pumps, or if you know the specs that works too. (PSI,GPH).
 
Re: Shop clean out. Buy this stuff or it is in the trash. Updated and items added.

Hokie,
I will see what I can come up with on the model numbers for these pumps.

KMCMINN,
I have a small shop and at the time of the add I was sick of looking at it all lying around. I did not want to just putt another shop clean out thread on here. There are like 20 a year. I wanted something to catch folks attention. Now I am stuck with it. If I change it. The guy that is looking for trash in the title may not find my stuff. Beside. I am not throwing away directly. I have a few pounds of Tannerite to use up first.

Don't forget guys If you see something on here you like, or want. Make an offer. I am ready to see it go to a good home.

Thanks,
 
Re: Shop clean out. Buy this stuff or it is in the trash. Updated and items added.

Wow man you really gave that psc reservoir away. I paid a lot for it (was brand new)........for that matter you paid a lot more than that wow.................
 
Re: Re: Shop clean out. Buy this stuff or it is in the trash. Updated and items added.

hokie_yj said:
What's the model# on the fuel pumps, or if you know the specs that works too. (PSI,GPH).
Interested in same, price and specs. Also price on the pickups, and #'s if you know them

Sent from my SM-G920V using Tapatalk
 
Re: Shop clean out. Buy this stuff or it is in the trash. Updated and items added.

The intake cathedral or rectangle ports?
 

Latest posts

Top